User:Mueller

ACL on Ext2/3

• mit Option acl mounten: mount -o remount,acl /
• für dauerhafte Nutzung: sed 's/\(ext3\s\+\)/\1acl,/' /etc/fstab | diff /etc/fstab - und das patchen :).
• apt-get install acl
• getfacl und setfacl benutzen
  • setfacl -m u:huffna:r file gibt Benutzer huffna Leserechte
  • Achtung: Im Gegensatz zu AFS unterstützt Ext3-ACL auch für einzelne Dateien ACLs.

Aufsetzen von Evolver13 (Ubuntu 7.10 Beta i386)

Allgemeine Dienste

• ldap über auth-client => ganz isi
• autofs mit autofs config von evolver12

Windriver (9.01) für Darkwing

• in redist/linux_wrappers.c: pci_register_driver() statt pci_module_init()
• Packages: linux-headers-generic linux-source für "make prepare" Informationen bzw. modpost (=> postprocess module symbol versions :))
• in redist/configure aufrufen (nicht von unten make => versemmelt config)
• in redist/ make install => fertig
• chgrp F9_remote /dev/windrvr6; chmod 664 /dev/windrvr6
• in /etc/udev/rules.d/40-permissions.rules anhängen:

 # Windriver is very old... wrong register
 ACTION=="add", DEVPATH=="/bus/pci/drivers/windrvr6_pci", RUN+="/lib/mk_windrvr6.sh"
 ACTION=="remove", DEVPATH=="/bus/pci/drivers/windrvr6_pci", RUN+="/lib/mk_windrvr6.sh"

• dazu /lib/mk_windrvr6.sh:

 #! /bin/bash
 
 if [ "$ACTION" == "add" ]; then
   major=`grep -w windrvr6 /proc/devices | cut -f1 -d" "`
   mknod /dev/windrvr6 c $major 0 
   chgrp 1009 /dev/windrvr6
   chmod 664 /dev/windrvr6
 fi
 
 if [ "$ACTION" == "remove" ]; then
   rm /dev/windrvr6
 fi

NEST (1.0.13)

• export CXX=`which g++`
• export CC=`which gcc`
• ../nest-1.0.13/configure
• make

PyNEST 20070419

• python setup.py build

PyGSL

• python setup.py build
• python setup.py install

Hardware

• EPROM falsches Image
• ein Jumper falsche Position => falscher Nathanslot aktiviert
• config_darkwing darkwing.bit 40 (oder darkwing_sctrl3.bit?)
• config_nathan nathan_top_spikey_ext_clk2_fastsdram.bit 2
• config_darkwing darkwing.bit 60 (oder darkwing_sctrl3.bit?)
• dinit -r

Computerzeug, das auch noch erledigt werden will

• NÜX

Notizen

Erklärungsbedürftige Meldungen des dwserver

[...]
sctrl.cpp:Exec(): Error at command 0x1, nathan 3, module 0
sctrl.cpp:Exec(): Error at command 0x1, nathan 3, module 0
sctrl.cpp:Exec(): Error at command 0x1, nathan 3, module 0
sctrl.cpp:Exec(): max retries on error reached, giving up

[...]
mutex.cpp:Wait(): Mutex Error: 110 ( = Wait timed out)
hawai.cpp:Wait(): detected FPGA IRQ timeout with pending FPGA IRQ, exiting normally...
mutex.cpp:Wait(): Mutex Error: 110 ( = Wait timed out)
hawai.cpp:Wait(): detected FPGA IRQ timeout with pending FPGA IRQ, exiting normally...
mutex.cpp:Wait(): Mutex Error: 110 ( = Wait timed out)
hawai.cpp:Wait(): detected FPGA IRQ timeout with pending FPGA IRQ, exiting normally...
msgqueue.c: Could not send message: Invalid argument

Performed       48 k read  transactions so far.

Merkwürdige Kernel Meldungen

[...]
MMM dd 06:66:00 prozac kernel: [666666.666666] ACPI: PCI interrupt for device 0000:05:00.0 disabled
MMM dd 06:66:00 prozac kernel: [666666.666667] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 23
MMM dd 06:66:00 prozac kernel: [666666.666668] ACPI: PCI interrupt for device 0000:05:00.0 disabled
MMM dd 06:66:00 prozac kernel: [666666.666669] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 23

oder auch:

MMM dd 06:66:00 prozac kernel: [666000.666000] irq 23: nobody cared (try booting with the "irqpoll" option)
MMM dd 06:66:00 prozac kernel: [666000.666000]  [__report_bad_irq+36/128] __report_bad_irq+0x24/0x80
MMM dd 06:66:00 prozac kernel: [666000.666000]  [note_interrupt+610/672] note_interrupt+0x262/0x2a0
MMM dd 06:66:00 prozac kernel: [666000.666000]  [<f8a7dee5>] intr_handler+0xa5/0xc0 [windrvr6]
MMM dd 06:66:00 prozac kernel: [666000.666000]  [<f8a79064>] wrapper_handler+0x13/0x20 [windrvr6]
MMM dd 06:66:00 prozac kernel: [666000.666000]  [handle_IRQ_event+48/96] handle_IRQ_event+0x30/0x60
MMM dd 06:66:00 prozac kernel: [666000.666000]  [handle_fasteoi_irq+187/240] handle_fasteoi_irq+0xbb/0xf0
MMM dd 06:66:00 prozac kernel: [666000.666000]  [do_IRQ+59/112] do_IRQ+0x3b/0x70
MMM dd 06:66:00 prozac kernel: [666000.666000]  [common_interrupt+35/48] common_interrupt+0x23/0x30
MMM dd 06:66:00 prozac kernel: [666000.666000]  [mwait_idle_with_hints+70/96] mwait_idle_with_hints+0x46/0x60
MMM dd 06:66:00 prozac kernel: [666000.666000]  [mwait_idle+0/32] mwait_idle+0x0/0x20
MMM dd 06:66:00 prozac kernel: [666000.666000]  [cpu_idle+83/224] cpu_idle+0x53/0xe0
MMM dd 06:66:00 prozac kernel: [666000.666000]  =======================
MMM dd 06:66:00 prozac kernel: [666000.666000] handlers:
MMM dd 06:66:00 prozac kernel: [666000.666000] [<f8a79051>] (wrapper_handler+0x0/0x20 [windrvr6])
MMM dd 06:66:00 prozac kernel: [666000.666000] Disabling IRQ #23