Revision as of 10:54, 3 January 2012

STILL

Here are some technical details about the still.

The heater is connected with BOX II X3:(1-4).
I_Still= 3-5 mA, depending on required cooling power.
The still heater is mounted on the lower side of the still. It's wires lead from the resistor via a fed-through at the flange of the still to the 1K-pot and are shielded by a textile tube.

Picture of former still heater.

Resistance of still heater : R_Still=880 ${\Omega }$ . Based on the SHE-manual it was supposed to be ~1k ${\Omega }$ ?

! removed November 2011, since it didn't work anymore. One resistance-foil was broken.

@@ Line 7: / Line 7: @@
 == Still Heater ==
+* The heater is connected with BOX II X3:(1-4).
+* I<sub>Still</sub>= 3-5 mA, depending on required cooling power.
+* The still heater is mounted on the lower side of the still. It's wires lead from the resistor via a fed-through at the flange of the still to the 1K-pot and are shielded by a textile tube.
+{{clear}}
 === Old Still Heater ===
+[[Image:Still_heater_old.jpg|right|thumb|180px|Picture of former still heater.]]
-! removed November 2011 !
-* Resistance of the still heater : R<sub>Still</sub>=880{{O}}.
+* Resistance of still heater : R<sub>Still</sub>=880{{O}}. Based on the SHE-manual it was supposed to be ~1k{{O}}?
-* The still heater is mounted on the lower side of the still. It's wires leading from the resistor via a fed-through at the flange of the still to the 1K-pot and are shieled by a textile tube.
+! removed November 2011, since it didn't work anymore. One resistance-foil was broken.
-* The heater is connected with BOX II X3:(1-4).
+{{clear}}