View source for EDV:Linux auf Laptops/hardy auf IBM X41 Tablet

= IBM X41 Tablet =


[[IMAGE:ThinkPadX41Tablet.jpg|right]]

=== Standard Features ===
* Intel Pentium M (Dothan), L2 2 MB cache
** 1.2GHz ULV (753)
** '''1.5GHz LV (758)'''
** 1.6GHz LV (778)
* Intel Graphics Media Accelerator 900
** 12.1" TFT display with 1024x768 resolution
* 256 or 512MB PC2-4200 memory standard (non-removable)
** one additional, unpopulated slot for a maximum of 1280 or 1536MB
* 40 or 60GB Hitachi Travelstar (C4K60 (1.8" drive)) ATA/IDE HDD (Model HTC4260xxG9AT00, where xx stands for the Capacity) [http://www.hitachigst.com/portal/site/en/menuitem.c3a19fd2cb7342d3c15ebaa3eac4f0a0/ producer page]
* AD1981B AC'97 Audio controller
* Broadcom Gigabit (10/100/1000) Ethernet controller
* CDC slot with one of the following:
** IBM Integrated 56K Modem (MDC-2)
** IBM Integrated Bluetooth IV with 56K Modem (BMDC-3)
* MiniPCI slot with one of the following:
** IBM 11a/b/g Wireless LAN Mini PCI Adapter II
** Intel PRO/Wireless 2200BG Mini-PCI Adapter
** Intel PRO/Wireless 2915ABG Mini-PCI Adapter
* IBM Embedded Security Subsystem 2.0
* IBM Active Protection System
* SD Card slot with IO support
* CardBus slot (Type 2)
* Integrated Fingerprint Reader on select models
* Wacom Serial Tablet PC Stylus
* Tablet Hardware Buttons


Einige Links
* http://www.thinkwiki.org/wiki/Category:X41_Tablet
* [ftp://ftp.software.ibm.com/pc/pccbbs/mobiles_pdf/39t9290.pdf ThinkPad X41Tablet - Hardware Maintenance Manual (March 2006)] (7,686,266 Bytes)
* [https://wiki.ubuntu.com/LaptopTestingTeam/ThinkpadX41Tablet Ubuntu support status page at Ubuntu Wiki]
* http://www.thinkwiki.org/wiki/Installing_Ubuntu_6.10_on_a_ThinkPad_X41_Tablet

== 1. kubuntu hardy installieren ==

Dazu verwende ich '''kubuntu-8.04-alternate-i386.iso'''

Wie immer ist es wichtig danach erst einmal das System zu aktualisieren. In diesem Fall mit 'Adept-Aktualsierer'.

Danach hat sofort funktioniert:
* SD-Karten-Slot
* Grafik (erst mal ...)
* Ethernet-Controller
* WLAN
* Sound

== etwas Software ==

Aktiviere backports und partner in /etc/apt/sources.list

 aptitude install openssh-server kedit nedit vim-gtk


== Grafik ==

xorg.conf 

 Section "InputDevice"
 	Identifier	"Generic Keyboard"
 	Driver		"kbd"
 	Option		"XkbRules"	"xorg"
 	Option		"XkbModel"	"pc105"
 	Option		"XkbLayout"	"de"
 	Option		"XkbOptions"	"lv3:ralt_switch"
 EndSection
 
 Section "InputDevice"
 	Identifier	"Configured Mouse"
 	Driver		"mouse"
 	Option		"CorePointer"
 EndSection
 
 Section "InputDevice"
 	Identifier	"Synaptics Touchpad"
 	Driver		"synaptics"
 	Option		"SendCoreEvents"	"true"
 	Option		"Device"		"/dev/psaux"
 	Option		"Protocol"		"auto-dev"
 	Option		"HorizEdgeScroll"	"0"
 EndSection
 
 '''Section "InputDevice"
 	'''Identifier	"stylus"
 	'''Driver		"wacom"
 	'''Option		"SendCoreEvents"	"true"
 	'''Option		"Device"		"/dev/ttyS0"
 	'''Option		"Type"		"stylus"
 	'''Option		"ForceDevice"	"ISDV4"
 '''EndSection
 
 '''Section "InputDevice"
       '''Driver        "wacom"
       '''Identifier    "cursor"
       '''Option		"SendCoreEvents"	"true"
       '''Option        "Device"        "/dev/ttyS0"
       '''Option        "Type"          "cursor"
       '''Option        "ForceDevice"   "ISDV4"
       '''Option        "Mode"          "Absolute"
       '''Option        "TPCButton"     "on"
 '''EndSection'''
 
 Section "Device"
 	Identifier	"Configured Video Device"
 EndSection
 
 Section "Monitor"
 	Identifier	"Configured Monitor"
 EndSection
 
 Section "Screen"
 	Identifier	"Default Screen"
 	Monitor		"Configured Monitor"
 	Device		"Configured Video Device"
 EndSection
 
 Section "ServerLayout"
 	Identifier	"Default Layout"
 	Screen		"Default Screen"
 	InputDevice	"Synaptics Touchpad"
        '''InputDevice    "cursor"
	'''InputDevice	"stylus"
 EndSection


in /usr/share/apps/kxkb/ubuntu.xmodmap hinzufügen:
 keycode 139 = XF86RotateWindows
Damit wird der 'Rotate' Knopf definiert



 #!/bin/sh
 #/etc/acpi/x41tsdown.sh
 echo 'Rotating screen...'
 if [ "`/usr/bin/xrandr -o right -v | grep -i 'randr' | wc -l`" -ne "1" ]
 then
     echo '!! Something went wrong...'
     export DISPLAY=":0.0"
     export XAUTHORITY=/var/lib/gdm/\:0.Xauth
     /bin/xset -display $DISPLAY dpms
     echo 'Trying to rotate again...'
     /usr/bin/xrandr -o right
 fi
 echo 'Rotating stylus...'
 /usr/bin/xsetwacom set stylus rotate 1
 echo 'Starting keyboard...'
 /usr/bin/xvkbd&

 #!/bin/sh
 #/etc/acpi/x41tsup.sh
 echo 'Unrotating screen...'
 if [ "`/usr/bin/xrandr -o normal -v | grep -i 'randr' | wc -l`" -ne "1" ]
 then
     echo '!! Something went wrong...'
     export DISPLAY=":0.0"
     export XAUTHORITY=/var/lib/gdm/\:0.Xauth
     /bin/xset -display $DISPLAY dpms
     echo 'Trying to unrotate again...'
     /usr/bin/xrandr -o normal
 fi
 echo 'Rotating stylus...'
 /usr/bin/xsetwacom set stylus rotate 0
 echo 'Killing keyboard...'
 killall xvkbd

Then run:

 sudo chown root.root /etc/acpi/x41tsdown.sh
 sudo chmod 755 /etc/acpi/x41tsdown.sh
 sudo chown root.root /etc/acpi/x41tsup.sh
 sudo chmod 755 /etc/acpi/x41tsup.sh

If you'd like to edit these scripts with your favorite text editor (which, I realize, is most likely [http://www.gnu.org/fun/jokes/ed.msg.html ed]), it's fairly obvious that they're located in <tt>/etc/acpi/</tt> as <tt>x41tsdown.sh</tt> and <tt>x41tsup.sh</tt>. These commands make the shell scripts that handle the events... once we register the events. Let's do that now.

 sudo cat <<EOF > /etc/acpi/events/x41t-swivel-down
 # /etc/acpi/events/x41t-swivel-down
 # called when tablet head swivels down
 event=ibm/hotkey HKEY 00000080 00005009
 action=/etc/acpi/x41tsdown.sh
 EOF

 sudo cat <<EOF > /etc/acpi/events/x41t-swivel-up
 # /etc/acpi/events/x41t-swivel-up
 # called when tablet head swivels up
 event=ibm/hotkey HKEY 00000080 0000500a
 action=/etc/acpi/x41tsup.sh
 EOF

Now, awaken your inner ACPI daemon with the following commands:

 sudo /etc/init.d/acpid force-reload 
 sudo /etc/init.d/acpid restart

And swivel down your LCD to make sure it works.

== FingerPrint Sensor ==


 aptitude install thinkfinger-tools libpam-thinkfinger

 tf-tool --acquire

Oder auch gleich 
 tf-tool --acquire /etc/pam_thinkfinger/'''loginname'''
um die eingelesenen Abdrücke (bir-Dateien) gleich nach /etc/pam_thinkfinger
kopieren zu lassen.

Und in /etc/pam.d/common-auth:

 auth	sufficient	pam_thinkfinger.so
 auth	requisite	pam_unix.so nullok_secure
 #auth	optional	pam_smbpass.so migrate missingok