Test Started at 13.11.2019 at 11:04:57 Set VOL target value to 0.6, new target current is 1.5. Set VOH target value to 1.0, new target current is 0.735. Starting test without load Started at 13.11.2019 at 11:04:59 Firmware version is 28 Enabling monitoring Enabling all voltages, using AuxPwr's built-in enable command Checking AuxPwr status... OK - continue testing Testing voltage VZK with target value 3.0 and tolerance 0.1 read 3.03 -- OK Testing voltage VCC with target value 9.6 and tolerance 0.1 read 9.687 -- OK Testing voltage DI_VBIAS with target value 1.25 and tolerance 0.1 read 1.258 -- OK Testing voltage DI_VCC33ANA with target value 3.3 and tolerance 0.1 read 3.396 -- OK Testing voltage VDD12 with target value 10.8 and tolerance 0.1 read 10.773 -- OK Testing voltage DI_VCC with target value 1.8 and tolerance 0.1 read 1.816 -- OK Testing voltage VCC33INT with target value 3.3 and tolerance 0.1 read 3.338 -- OK Testing voltage DI_VCCANA with target value 1.8 and tolerance 0.1 read 1.815 -- OK Testing voltage VDD25 with target value 2.5 and tolerance 0.1 read 2.527 -- OK Testing voltage VOL with target value 0.6 and tolerance 0.1 read 0.604 -- OK Testing voltage VDDBUS with target value 1.0 and tolerance 0.1 read 1.013 -- OK Testing voltage VOH with target value 1.0 and tolerance 0.1 read 0.999 -- OK Testing voltage VCC33INT_D with target value 3.9 and tolerance 0.1 read 3.991 -- OK Testing voltage VDD15TEMP with target value 15.0 and tolerance 0.1 read 15.136 -- OK Testing voltage VDD5 with target value 5.0 and tolerance 0.1 read 5.075 -- OK Testing idle current VDD25 with target value 0.025 and tolerance 0.25 read 0.0 -- OK Testing idle current VDD5 with target value 0.01 and tolerance 0.25 read 0.001 -- OK Testing idle current DI_VBIAS with target value 0.01 and tolerance 0.25 read 0.0 -- OK Testing idle current DI_VCC with target value 0.15 and tolerance 0.25 read 0.039 -- OK Testing idle current VOL with target value 0.15 and tolerance 0.25 read 0.0 -- OK Testing idle current VDDBUS with target value 0.15 and tolerance 0.25 read 0.062 -- OK Testing idle current DI_VCCANA with target value 0.01 and tolerance 0.25 read 0.0 -- OK Testing idle current VOH with target value 0.15 and tolerance 0.25 read 0.0 -- OK Testing idle current VDD12 with target value 0.01 and tolerance 0.25 read 0.005 -- OK Testing idle current DI_VCC33ANA with target value 0.01 and tolerance 0.25 read 0.0 -- OK Disabling monitoring Disabling all voltages, using AuxPwr's built-in disable command Enabling monitoring again Test without load sucessful - continue to test with resistive load Starting test with load Started at 13.11.2019 at 11:05:26 Enabling all voltages, using AuxPwr's built-in enable command Checking AuxPwr status... OK - continue testing Testing voltage VZK with target value 3.0 and tolerance 0.1 read 3.036 -- OK Testing voltage VCC with target value 9.6 and tolerance 0.1 read 9.604 -- OK Testing voltage DI_VBIAS with target value 1.25 and tolerance 0.1 read 1.259 -- OK Testing voltage DI_VCC33ANA with target value 3.3 and tolerance 0.1 read 3.399 -- OK Testing voltage VDD12 with target value 10.8 and tolerance 0.1 read 10.766 -- OK Testing voltage DI_VCC with target value 1.8 and tolerance 0.1 read 1.823 -- OK Testing voltage VCC33INT with target value 3.3 and tolerance 0.1 read 3.338 -- OK Testing voltage DI_VCCANA with target value 1.8 and tolerance 0.1 read 1.812 -- OK Testing voltage VDD25 with target value 2.5 and tolerance 0.1 read 2.525 -- OK Testing voltage VOL with target value 0.6 and tolerance 0.1 read 0.62 -- OK Testing voltage VDDBUS with target value 1.0 and tolerance 0.1 read 1.016 -- OK Testing voltage VOH with target value 1.0 and tolerance 0.1 read 0.999 -- OK Testing voltage VCC33INT_D with target value 3.9 and tolerance 0.1 read 3.991 -- OK Testing voltage VDD15TEMP with target value 15.0 and tolerance 0.1 read 15.136 -- OK Testing voltage VDD5 with target value 5.0 and tolerance 0.1 read 5.072 -- OK Testing current VDD25 with target value 2.0 and tolerance 0.5 read 1.639 -- OK Testing current VDD5 with target value 0.15 and tolerance 0.2 read 0.145 -- OK Testing current DI_VBIAS with target value 0.035 and tolerance 0.2 read 0.037 -- OK Testing current DI_VCC with target value 1.2 and tolerance 0.25 read 1.101 -- OK Testing current VOL with target value 1.5 and tolerance 0.3 read 1.437 -- OK Testing current VDDBUS with target value 5.5 and tolerance 0.2 read 5.513 -- OK Testing current DI_VCCANA with target value 0.45 and tolerance 0.2 read 0.471 -- OK Testing current VOH with target value 0.735 and tolerance 0.3 read 0.875 -- OK Testing current VDD12 with target value 0.17 and tolerance 0.2 read 0.153 -- OK Testing current DI_VCC33ANA with target value 1.0 and tolerance 0.2 read 0.938 -- OK INFO: Test with load sucessful. Disabling monitoring Disabling all voltages, using AuxPwr's built-in disable command Enabling monitoring again