https://wiki.kip.uni-heidelberg.de/KIPwiki/api.php?action=feedcontributions&user=Kala&feedformat=atomKIP Wiki - User contributions [en]2024-03-28T22:21:34ZUser contributionsMediaWiki 1.39.4https://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:EDUROAM&diff=39620EDV:EDUROAM2024-02-05T11:08:29Z<p>Kala: </p>
<hr />
<div>'''Eduroam''' can be set up either using [https://cat.eduroam.org/ '''Configuration Assistant Tool(CAT)''']) or [https://www.geteduroam.app/ '''geteduroam app''']<br />
<br />
'''Overview & How to (URZ):''' [https://www.urz.uni-heidelberg.de/de/service-katalog/netzwerk/wlan-ueber-eduroam Eduroam (deutsch)], [https://www.urz.uni-heidelberg.de/en/service-catalogue/network/wi-fi-via-eduroam Eduroam (english)]<br />
<br />
=== Problems while updating eduroam certificates ===<br />
<br />
==== Windows ====<br />
<br />
If no longer a connection to eduroam can be established you have to update the certificates by installing eduroam again. You can get the installation tool on [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)].<br />
<br />
If it's not able to open a connection after updating the certificates, you have to delete the installed ones. The possibility to do this in Windows is opening the certificate manager "certmgr.msc". There you have to search the certificate "T-TeleSec GlobalRoot Class 2" and remove all that are not valid till 2033. And then also search for certificates from "DFN-Verein Global Issuing CA" and remove all which are not valid till 2031.<br />
<br />
==== Linux ====<br />
<br />
For the installation on Linux you first download the installation script of the Universität Heidelberg from [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)] (it's a python script called "eduroam-linux-Universitat_Heidelberg-Standard_ab_2024.py"). After that remove the old profile by opening the configuration form of eduroam on the "NetworkManager" and clicking "forget connection". Then run the script with python.</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:EDUROAM&diff=39619EDV:EDUROAM2024-02-05T11:07:18Z<p>Kala: /* Problems while updating eduroam certificates */</p>
<hr />
<div>'''Eduroam''' can be set up either using [https://cat.eduroam.org/ '''Configuration Assistant Tool(CAT)''']) or [https://www.geteduroam.app/ '''geteduroam app''']<br />
<br />
<br />
'''Overview & How to (URZ):''' [https://www.urz.uni-heidelberg.de/de/service-katalog/netzwerk/wlan-ueber-eduroam Eduroam (deutsch)], [https://www.urz.uni-heidelberg.de/en/service-catalogue/network/wi-fi-via-eduroam Eduroam (english)]<br />
<br />
<br />
=== Problems while updating eduroam certificates ===<br />
<br />
==== Windows ====<br />
<br />
If no longer a connection to eduroam can be established you have to update the certificates by installing eduroam again. You can get the installation tool on [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)].<br />
<br />
If it's not able to open a connection after updating the certificates, you have to delete the installed ones. The possibility to do this in Windows is opening the certificate manager "certmgr.msc". There you have to search the certificate "T-TeleSec GlobalRoot Class 2" and remove all that are not valid till 2033. And then also search for certificates from "DFN-Verein Global Issuing CA" and remove all which are not valid till 2031.<br />
<br />
==== Linux ====<br />
<br />
For the installation on Linux you first download the installation script of the Universität Heidelberg from [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)] (it's a python script called "eduroam-linux-Universitat_Heidelberg-Standard_ab_2024.py"). After that remove the old profile by opening the configuration form of eduroam on the "NetworkManager" and clicking "forget connection". Then run the script with python.</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:EDUROAM&diff=39618EDV:EDUROAM2024-02-05T11:05:44Z<p>Kala: </p>
<hr />
<div>'''Eduroam''' can be set up either using [https://cat.eduroam.org/ '''Configuration Assistant Tool(CAT)''']) or [https://www.geteduroam.app/ '''geteduroam app''']<br />
<br />
<br />
'''Overview & How to (URZ):''' [https://www.urz.uni-heidelberg.de/de/service-katalog/netzwerk/wlan-ueber-eduroam Eduroam (deutsch)], [https://www.urz.uni-heidelberg.de/en/service-catalogue/network/wi-fi-via-eduroam Eduroam (english)]<br />
<br />
<br />
== Problems while updating eduroam certificates ==<br />
<br />
=== Windows ===<br />
<br />
If no longer a connection to eduroam can be established you have to update the certificates by installing eduroam again. You can get the installation tool on [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)].<br />
<br />
If it's not able to open a connection after updating the certificates, you have to delete the installed ones. The possibility to do this in Windows is opening the certificate manager "certmgr.msc". There you have to search the certificate "T-TeleSec GlobalRoot Class 2" and remove all that are not valid till 2033. And then also search for certificates from "DFN-Verein Global Issuing CA" and remove all which are not valid till 2031.<br />
<br />
=== Linux ===<br />
<br />
For the installation on Linux you first download the installation script of the Universität Heidelberg from [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)] (it's a python script called "eduroam-linux-Universitat_Heidelberg-Standard_ab_2024.py"). After that remove the old profile by opening the configuration form of eduroam on the "NetworkManager" and clicking "forget connection". Then run the script with python.</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:EDUROAM&diff=39617EDV:EDUROAM2024-02-05T11:03:41Z<p>Kala: </p>
<hr />
<div>'''Eduroam''' can be set up either using [https://cat.eduroam.org/ '''Configuration Assistant Tool(CAT)''']) or [https://www.geteduroam.app/ '''geteduroam app''']<br />
<br />
'How to' from URZ: [https://www.urz.uni-heidelberg.de/de/service-katalog/netzwerk/wlan-ueber-eduroam Eduroam (deutsch)], [https://www.urz.uni-heidelberg.de/en/service-catalogue/network/wi-fi-via-eduroam Eduroam (english)]<br />
<br />
<br />
== Problems while updating eduroam certificates ==<br />
<br />
=== Windows ===<br />
<br />
If no longer a connection to eduroam can be established you have to update the certificates by installing eduroam again. You can get the installation tool on [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)].<br />
<br />
If it's not able to open a connection after updating the certificates, you have to delete the installed ones. The possibility to do this in Windows is opening the certificate manager "certmgr.msc". There you have to search the certificate "T-TeleSec GlobalRoot Class 2" and remove all that are not valid till 2033. And then also search for certificates from "DFN-Verein Global Issuing CA" and remove all which are not valid till 2031.<br />
<br />
=== Linux ===<br />
<br />
For the installation on Linux you first download the installation script of the Universität Heidelberg from [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)] (it's a python script called "eduroam-linux-Universitat_Heidelberg-Standard_ab_2024.py"). After that remove the old profile by opening the configuration form of eduroam on the "NetworkManager" and clicking "forget connection". Then run the script with python.</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:EDUROAM&diff=39616EDV:EDUROAM2024-02-05T11:00:42Z<p>Kala: </p>
<hr />
<div>Eduroam can be set up either using [https://cat.eduroam.org/ '''Configuration Assistant Tool(CAT)''']) or [https://www.geteduroam.app/ '''geteduroam app''']<br />
<br />
'How to' from URZ: [https://www.urz.uni-heidelberg.de/de/service-katalog/netzwerk/wlan-ueber-eduroam Eduroam (deutsch)], [https://www.urz.uni-heidelberg.de/en/service-catalogue/network/wi-fi-via-eduroam Eduroam (english)]<br />
<br />
<br />
== Problems while updating eduroam certificates ==<br />
<br />
=== Windows ===<br />
<br />
If no longer a connection to eduroam can be established you have to update the certificates by installing eduroam again. You can get the installation tool on [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)].<br />
<br />
If it's not able to open a connection after updating the certificates, you have to delete the installed ones. The possibility to do this in Windows is opening the certificate manager "certmgr.msc". There you have to search the certificate "T-TeleSec GlobalRoot Class 2" and remove all that are not valid till 2033. And then also search for certificates from "DFN-Verein Global Issuing CA" and remove all which are not valid till 2031.<br />
<br />
=== Linux ===<br />
<br />
For the installation on Linux you first download the installation script of the Universität Heidelberg from [https://cat.eduroam.org/# Configuration Assistant Tool (CAT)] (it's a python script called "eduroam-linux-Universitat_Heidelberg-Standard_ab_2024.py"). After that remove the old profile by opening the configuration form of eduroam on the "NetworkManager" and clicking "forget connection". Then run the script with python.</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=File:Test-upload.txt&diff=38524File:Test-upload.txt2021-12-15T16:10:42Z<p>Kala: </p>
<hr />
<div></div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Drucker&diff=38458EDV:Drucker2021-10-20T07:55:49Z<p>Kala: /* Druckerübersicht */</p>
<hr />
<div>= Drucker im KIP =<br />
<br />
Es stehen momentan 4 Drucker, verteilt an 3 Standorten, zur Verfügung. <br />
<br />
Für diese Drucker existiert eine Abrechnung pro Benutzeraccount, deswegen können diese auch nur über den [https://printer.kip.uni-heidelberg.de Druckerserver] mit Verwendung des [[EDV:KIP-Account|KIP-Accounts]] benutzt werden.<br />
Auf diesen Druckern kann von jedem Rechner (im KIP-Netz) gedruckt werden.<br />
<br />
<br />
* ''' [[EDV:Drucker/Linux|Installation Linux]]''' <br />
* ''' [[EDV:Drucker/Windows7|Installation Windows 7, 8 & 10]] ''' <br />
* ''' [[EDV:Drucker/Mac OS X|Installation Mac OS X]]''' <br />
<br />
<!-- [[EDV:Drucker/Windows|Installation WindowsXP ]] oder --><br />
<br />
== Druckerübersicht ==<br />
<br />
{|{{Prettytable}}<br />
! style="background:lightgray" | Name (DNS)<br />
! style="background:lightgray" | Standort<br />
! style="background:lightgray" | Typ / Homepage<br />
! style="background:lightgray" | Modus<br />
! style="background:lightgray" | Treiber<br />
! style="background:lightgray" | Manuals<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/clj clj]''' <br />
| 3.OG Raum 03.921 <br />
| HP Color Laserjet CP4025dn <br />
| Color<br />
| <strike>Windows</strike> s.u., [http://printer.kip.uni-heidelberg.de/driver/linux/clj.ppd linux:ppd], [http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=3965795&ac.admitted=1413198090678.876444892.492883150 MacOS] <br />
| [http://printer/manuals/clj_HP-Color-LaserJet-4600 DE / EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r1 r1]'''<br />
| 1.OG Süd-Ost-Ecke <br />
| [http://r1.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color<br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r1.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc3000/imc3000.htm Windows / MacOS]<br />
|[https://support.ricoh.com/bb_v1oi/pub_e/oi/0001077/0001077605/VD0BQ7053_09/D0BQ7142D_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001077/0001077457/VD0BQ7053_01/D0BQ7053.pdf EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r2 r2]''' <br />
| 2.OG Süd-Ost-Ecke<br />
| [http://r1.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color<br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r2.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc3000/imc3000.htm Windows / MacOS]<br />
|[https://support.ricoh.com/bb_v1oi/pub_e/oi/0001077/0001077605/VD0BQ7053_09/D0BQ7142D_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001077/0001077457/VD0BQ7053_01/D0BQ7053.pdf EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r3 r3]''' <br />
| 3.OG Raum 03.921<br />
| [http://r3.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color <br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r3.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc3000/imc3000.htm Windows / MacOS]<br />
|[https://support.ricoh.com/bb_v1oi/pub_e/oi/0001077/0001077605/VD0BQ7053_09/D0BQ7142D_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001077/0001077457/VD0BQ7053_01/D0BQ7053.pdf EN]<br />
|-<br />
|}<br />
<br />
== Hinweise ==<br />
<br />
* Die '''RICOH MP C2503''' Modelle funktionieren gut auf allen Systemen mit dem '''PostScript3 Driver''' (getestet mit Ver.1.4.0.0 16/08/2015) <br />
<br />
* Da es Probleme bei der Installation des Windows-Treibers für den '''clj''' - HP Color Laserjet CP4025dn gibt, benutzen Sie bitte den in Windows vorhandenen '''HP Color Laserjet CP4005''' Treiber oder den von HP für die [https://support.hp.com/de-de/drivers/selfservice/hp-color-laserjet-enterprise-cp4025-printer-series/3965792 HP Color LaserJet Enterprise CP4025 Druckerserie] angebotenen.<br />
<br />
<br />
* Alle Drucker verfügen über eine Duplex-Einheit und sind default auf doppelseitigen Druck eingestellt. Falls das nicht erwünscht ist, kann die Einstellung vor dem Drucken geändert werden.<br />
<br />
<br />
* Übersicht zum momentanen Status der einzelnen [https://printer.kip.uni-heidelberg.de/printers Drucker] und [https://printer.kip.uni-heidelberg.de/jobs/ Jobs]<br />
<br />
* Abfrage der persönlichen [http://printer.kip.uni-heidelberg.de/pykota/printquota.cgi Prinquota]<br />
<br />
* Vorab [http://printer.kip.uni-heidelberg.de/pykota/pykotme.cgi Kostencheck] für ein Dokument<br />
<br />
<br />
* Bei Problemen mit der Installation oder dem Betrieb der Drucker: '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]'''</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Drucker&diff=38457EDV:Drucker2021-10-20T07:51:23Z<p>Kala: /* Druckerübersicht */</p>
<hr />
<div>= Drucker im KIP =<br />
<br />
Es stehen momentan 4 Drucker, verteilt an 3 Standorten, zur Verfügung. <br />
<br />
Für diese Drucker existiert eine Abrechnung pro Benutzeraccount, deswegen können diese auch nur über den [https://printer.kip.uni-heidelberg.de Druckerserver] mit Verwendung des [[EDV:KIP-Account|KIP-Accounts]] benutzt werden.<br />
Auf diesen Druckern kann von jedem Rechner (im KIP-Netz) gedruckt werden.<br />
<br />
<br />
* ''' [[EDV:Drucker/Linux|Installation Linux]]''' <br />
* ''' [[EDV:Drucker/Windows7|Installation Windows 7, 8 & 10]] ''' <br />
* ''' [[EDV:Drucker/Mac OS X|Installation Mac OS X]]''' <br />
<br />
<!-- [[EDV:Drucker/Windows|Installation WindowsXP ]] oder --><br />
<br />
== Druckerübersicht ==<br />
<br />
{|{{Prettytable}}<br />
! style="background:lightgray" | Name (DNS)<br />
! style="background:lightgray" | Standort<br />
! style="background:lightgray" | Typ / Homepage<br />
! style="background:lightgray" | Modus<br />
! style="background:lightgray" | Treiber<br />
! style="background:lightgray" | Manuals<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/clj clj]''' <br />
| 3.OG Raum 03.921 <br />
| HP Color Laserjet CP4025dn <br />
| Color<br />
| <strike>Windows</strike> s.u., [http://printer.kip.uni-heidelberg.de/driver/linux/clj.ppd linux:ppd], [http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=3965795&ac.admitted=1413198090678.876444892.492883150 MacOS] <br />
| [http://printer/manuals/clj_HP-Color-LaserJet-4600 DE / EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r1 r1]'''<br />
| 1.OG Süd-Ost-Ecke <br />
| [http://r1.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color<br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r1.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc3000/imc3000.htm Windows / MacOS]<br />
|[http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050192/VD17677xx_03/D1767701A_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050040/VD1767503/D1767503.pdf EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r2 r2]''' <br />
| 2.OG Süd-Ost-Ecke<br />
| [http://r1.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color<br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r2.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc3000/imc3000.htm Windows / MacOS]<br />
|[http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050192/VD17677xx_03/D1767701A_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050040/VD1767503/D1767503.pdf EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r3 r3]''' <br />
| 3.OG Raum 03.921<br />
| [http://r3.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color <br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r3.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/apc/model/imc3000/imc3000.htm Windows / MacOS]<br />
|[http://support.ricoh.com/bb_v1oi/pub_e/oi/0001054/0001054702/VM16175xx_04/M1617581B_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001054/0001054747/VM1617530/M1617530.pdf EN]<br />
|-<br />
|}<br />
<br />
== Hinweise ==<br />
<br />
* Die '''RICOH MP C2503''' Modelle funktionieren gut auf allen Systemen mit dem '''PostScript3 Driver''' (getestet mit Ver.1.4.0.0 16/08/2015) <br />
<br />
* Da es Probleme bei der Installation des Windows-Treibers für den '''clj''' - HP Color Laserjet CP4025dn gibt, benutzen Sie bitte den in Windows vorhandenen '''HP Color Laserjet CP4005''' Treiber oder den von HP für die [https://support.hp.com/de-de/drivers/selfservice/hp-color-laserjet-enterprise-cp4025-printer-series/3965792 HP Color LaserJet Enterprise CP4025 Druckerserie] angebotenen.<br />
<br />
<br />
* Alle Drucker verfügen über eine Duplex-Einheit und sind default auf doppelseitigen Druck eingestellt. Falls das nicht erwünscht ist, kann die Einstellung vor dem Drucken geändert werden.<br />
<br />
<br />
* Übersicht zum momentanen Status der einzelnen [https://printer.kip.uni-heidelberg.de/printers Drucker] und [https://printer.kip.uni-heidelberg.de/jobs/ Jobs]<br />
<br />
* Abfrage der persönlichen [http://printer.kip.uni-heidelberg.de/pykota/printquota.cgi Prinquota]<br />
<br />
* Vorab [http://printer.kip.uni-heidelberg.de/pykota/pykotme.cgi Kostencheck] für ein Dokument<br />
<br />
<br />
* Bei Problemen mit der Installation oder dem Betrieb der Drucker: '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]'''</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Drucker&diff=38456EDV:Drucker2021-10-20T07:45:18Z<p>Kala: /* Druckerübersicht */</p>
<hr />
<div>= Drucker im KIP =<br />
<br />
Es stehen momentan 4 Drucker, verteilt an 3 Standorten, zur Verfügung. <br />
<br />
Für diese Drucker existiert eine Abrechnung pro Benutzeraccount, deswegen können diese auch nur über den [https://printer.kip.uni-heidelberg.de Druckerserver] mit Verwendung des [[EDV:KIP-Account|KIP-Accounts]] benutzt werden.<br />
Auf diesen Druckern kann von jedem Rechner (im KIP-Netz) gedruckt werden.<br />
<br />
<br />
* ''' [[EDV:Drucker/Linux|Installation Linux]]''' <br />
* ''' [[EDV:Drucker/Windows7|Installation Windows 7, 8 & 10]] ''' <br />
* ''' [[EDV:Drucker/Mac OS X|Installation Mac OS X]]''' <br />
<br />
<!-- [[EDV:Drucker/Windows|Installation WindowsXP ]] oder --><br />
<br />
== Druckerübersicht ==<br />
<br />
{|{{Prettytable}}<br />
! style="background:lightgray" | Name (DNS)<br />
! style="background:lightgray" | Standort<br />
! style="background:lightgray" | Typ / Homepage<br />
! style="background:lightgray" | Modus<br />
! style="background:lightgray" | Treiber<br />
! style="background:lightgray" | Manuals<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/clj clj]''' <br />
| 3.OG Raum 03.921 <br />
| HP Color Laserjet CP4025dn <br />
| Color<br />
| <strike>Windows</strike> s.u., [http://printer.kip.uni-heidelberg.de/driver/linux/clj.ppd linux:ppd], [http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=3965795&ac.admitted=1413198090678.876444892.492883150 MacOS] <br />
| [http://printer/manuals/clj_HP-Color-LaserJet-4600 DE / EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r1 r1]'''<br />
| 1.OG Süd-Ost-Ecke <br />
| [http://r1.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color<br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r1.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/lan_a/model/mpc2003/mpc2003en.htm Windows / MacOS]<br />
|[http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050192/VD17677xx_03/D1767701A_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050040/VD1767503/D1767503.pdf EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r2 r2]''' <br />
| 2.OG Süd-Ost-Ecke<br />
| [http://r1.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color<br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r2.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/lan_a/model/mpc2003/mpc2003en.htm Windows / MacOS]<br />
|[http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050192/VD17677xx_03/D1767701A_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001050/0001050040/VD1767503/D1767503.pdf EN]<br />
|-<br />
| '''[https://printer.kip.uni-heidelberg.de/printers/r3 r3]''' <br />
| 3.OG Raum 03.921<br />
| [http://r3.kip.uni-heidelberg.de RICOH IM C3000]<br />
| Color <br />
|[http://printer.kip.uni-heidelberg.de/driver/linux/r3.ppd linux:ppd], [http://support.ricoh.com/bb/html/dr_ut_e/re/model/mpc401/mpc401en.htm Windows / MacOS]<br />
|[http://support.ricoh.com/bb_v1oi/pub_e/oi/0001054/0001054702/VM16175xx_04/M1617581B_de.pdf DE] [http://support.ricoh.com/bb_v1oi/pub_e/oi/0001054/0001054747/VM1617530/M1617530.pdf EN]<br />
|-<br />
|}<br />
<br />
== Hinweise ==<br />
<br />
* Die '''RICOH MP C2503''' Modelle funktionieren gut auf allen Systemen mit dem '''PostScript3 Driver''' (getestet mit Ver.1.4.0.0 16/08/2015) <br />
<br />
* Da es Probleme bei der Installation des Windows-Treibers für den '''clj''' - HP Color Laserjet CP4025dn gibt, benutzen Sie bitte den in Windows vorhandenen '''HP Color Laserjet CP4005''' Treiber oder den von HP für die [https://support.hp.com/de-de/drivers/selfservice/hp-color-laserjet-enterprise-cp4025-printer-series/3965792 HP Color LaserJet Enterprise CP4025 Druckerserie] angebotenen.<br />
<br />
<br />
* Alle Drucker verfügen über eine Duplex-Einheit und sind default auf doppelseitigen Druck eingestellt. Falls das nicht erwünscht ist, kann die Einstellung vor dem Drucken geändert werden.<br />
<br />
<br />
* Übersicht zum momentanen Status der einzelnen [https://printer.kip.uni-heidelberg.de/printers Drucker] und [https://printer.kip.uni-heidelberg.de/jobs/ Jobs]<br />
<br />
* Abfrage der persönlichen [http://printer.kip.uni-heidelberg.de/pykota/printquota.cgi Prinquota]<br />
<br />
* Vorab [http://printer.kip.uni-heidelberg.de/pykota/pykotme.cgi Kostencheck] für ein Dokument<br />
<br />
<br />
* Bei Problemen mit der Installation oder dem Betrieb der Drucker: '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]'''</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:VPN&diff=37641EDV:VPN2020-03-24T15:56:05Z<p>Kala: /* Linux */</p>
<hr />
<div>=== Windows ===<br />
<br />
-> [[EDV:Windows Remote Desktop]]<br />
<br />
===== OpenVPN =====<br />
<br />
* open "http://portal.kip.uni-heidelberg.de/kipvpn" and login with your KIP-Account<br />
* depending on your Windows version download "openvpn-install-2.4.8-I602-Win7.exe (Win 7 lokale Kopie der Installationsdatei)" or "openvpn-install-2.4.8-I602-Win10.exe (Win 10 lokale Kopie der Installationsdatei)" <br />
* also download the ZIP-file of the configuration files, unzip it and copy/move the files to "c:\Program Files\OpenVPN\config"<br />
* if in the taskline on the bottom on the right side no symbol of OpenVPN is shown open the "OpenVPN GUI" in the start-menu<br />
* do a right-click on the "OpenVPN"-Symbol and select "connect"/"Verbinden"<br />
* to open the vpn-connection you have to use your KIP-Account and the password of it to login<br />
* open "remotedesktopconnection"/"remotedesktopverbindung" and set as remote host the hostname of your pc <host-name>.kip.uni-heidelberg.de and click "connect"/"verbinden"<br />
* now the connection should be established<br />
<br />
<gallery><br />
OpenVPN-Configuration.jpg|OpenVPN-Configuration<br />
OpenVPN-StartMenu.jpg|OpenVPN-StartMenu<br />
OpenVPN-TaskMenu.jpg|OpenVPN-TaskMenu<br />
</gallery><br />
<br />
=== macOS ===<br />
<br />
===== Cisco Anyconnect =====<br />
<br />
Cisco Anyconnect is needed to establish VPN connections provided by the URZ. You can download it directly on their [https://public.urz.uni-heidelberg.de/license/vpn/ciscoclient/aktuelle/mac/ server] (you have to login with the URZ-account). After installing it you have to chose "Uni-Heidelberg - vpnsrv1" as server and connect by "<KIP-username>@kip.uni-heidelberg.de" as user and your KIP-password.<br />
<br />
===== kipvpn =====<br />
<br />
kipvpn.kip.uni-heidelberg.de ist a server of the KIP to establish OpenVPN connections. You can download the needed software and configuration on [https://portal.kip.uni-heidelberg.de/kipvpn portal].<br />
<br />
* download „Tunnelblick_3.8.1_build_5400.dmg“ listet at „Mac OS-X - Tunnelblick“ and the configuration files by downloading „Alle Dateien in einer ZIP-Datei“. After downloading them unpack each of the configuration-files in the same folder<br />
* edit the file „kipvpn.ovpn“ and remove „c://Programme/OpenVPN/config/“ before each filename and save it<br />
* install Tunnelblick<br />
* on the first start select „Ich habe Konfigurationsdateien“/“I have configuration files“ -> and in the next windows „OK“<br />
* select „kipvpn.ovpn“ in the browser and move it to the window of tunnelblick or the symbol of Tunnelblick on the top right and select to install it for one/every user<br />
* now click on „verbinden kipvpn“/“connect kipvpn“, enter your KIP-username and the password, on the message you can select „Nicht mehr bei DNS-Probleme jeglicher Konfiguration warnen“/“Do not warn about this again for any configuration“ and press “Ok“<br />
* open "VPN details", click on „Einstellungen“/“Settings“ beside „Log“ at the top and select „Sämtlichen IPv4-Datenverkehr durch das VPN leiten“/“Route all IPv4 traffic through the VPN“<br />
[[File:Tunnelblick-settings.png|300px|thumb|center]]<br />
* now you can select „verbinden“/“Connect“ to establish a connection to he KIP-network<br />
* don’t forget to close it, click „trennen“/“Disconnect“<br />
<br />
=== Linux ===<br />
<br />
Linux users are advised to use x2go <br />
<br />
* Download x2go client from https://wiki.x2go.org/doku.php/download:start<br />
<br />
* Enter the hostname portal1.kip.uni-heidelberg.de or portal2.kip.uni-heidelberg.de with port 22<br />
<br />
If no connection can be made, please log on to https://portal.kip.uni-heidelberg.de/, read the IP address in the right column and write to weis@kip.ui-heidelberg.de<br />
<br />
And also '''Openvpn''' can be installed to establish the connection to KIP VPN Server as mentioned in https://portal.kip.uni-heidelberg.de/kipvpn/<br />
<br />
Download the configuration files & copy them into /etc/openvpn/</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:VPN&diff=37640EDV:VPN2020-03-24T15:44:27Z<p>Kala: /* macOS */</p>
<hr />
<div>=== Windows ===<br />
<br />
-> [[EDV:Windows Remote Desktop]]<br />
<br />
===== OpenVPN =====<br />
<br />
* open "http://portal.kip.uni-heidelberg.de/kipvpn" and login with your KIP-Account<br />
* depending on your Windows version download "openvpn-install-2.4.8-I602-Win7.exe (Win 7 lokale Kopie der Installationsdatei)" or "openvpn-install-2.4.8-I602-Win10.exe (Win 10 lokale Kopie der Installationsdatei)" <br />
* also download the ZIP-file of the configuration files, unzip it and copy/move the files to "c:\Program Files\OpenVPN\config"<br />
* if in the taskline on the bottom on the right side no symbol of OpenVPN is shown open the "OpenVPN GUI" in the start-menu<br />
* do a right-click on the "OpenVPN"-Symbol and select "connect"/"Verbinden"<br />
* to open the vpn-connection you have to use your KIP-Account and the password of it to login<br />
* open "remotedesktopconnection"/"remotedesktopverbindung" and set as remote host the hostname of your pc <host-name>.kip.uni-heidelberg.de and click "connect"/"verbinden"<br />
* now the connection should be established<br />
<br />
<gallery><br />
OpenVPN-Configuration.jpg|OpenVPN-Configuration<br />
OpenVPN-StartMenu.jpg|OpenVPN-StartMenu<br />
OpenVPN-TaskMenu.jpg|OpenVPN-TaskMenu<br />
</gallery><br />
<br />
=== macOS ===<br />
<br />
===== Cisco Anyconnect =====<br />
<br />
Cisco Anyconnect is needed to establish VPN connections provided by the URZ. You can download it directly on their [https://public.urz.uni-heidelberg.de/license/vpn/ciscoclient/aktuelle/mac/ server] (you have to login with the URZ-account). After installing it you have to chose "Uni-Heidelberg - vpnsrv1" as server and connect by "<KIP-username>@kip.uni-heidelberg.de" as user and your KIP-password.<br />
<br />
===== kipvpn =====<br />
<br />
kipvpn.kip.uni-heidelberg.de ist a server of the KIP to establish OpenVPN connections. You can download the needed software and configuration on [https://portal.kip.uni-heidelberg.de/kipvpn portal].<br />
<br />
* download „Tunnelblick_3.8.1_build_5400.dmg“ listet at „Mac OS-X - Tunnelblick“ and the configuration files by downloading „Alle Dateien in einer ZIP-Datei“. After downloading them unpack each of the configuration-files in the same folder<br />
* edit the file „kipvpn.ovpn“ and remove „c://Programme/OpenVPN/config/“ before each filename and save it<br />
* install Tunnelblick<br />
* on the first start select „Ich habe Konfigurationsdateien“/“I have configuration files“ -> and in the next windows „OK“<br />
* select „kipvpn.ovpn“ in the browser and move it to the window of tunnelblick or the symbol of Tunnelblick on the top right and select to install it for one/every user<br />
* now click on „verbinden kipvpn“/“connect kipvpn“, enter your KIP-username and the password, on the message you can select „Nicht mehr bei DNS-Probleme jeglicher Konfiguration warnen“/“Do not warn about this again for any configuration“ and press “Ok“<br />
* open "VPN details", click on „Einstellungen“/“Settings“ beside „Log“ at the top and select „Sämtlichen IPv4-Datenverkehr durch das VPN leiten“/“Route all IPv4 traffic through the VPN“<br />
[[File:Tunnelblick-settings.png|300px|thumb|center]]<br />
* now you can select „verbinden“/“Connect“ to establish a connection to he KIP-network<br />
* don’t forget to close it, click „trennen“/“Disconnect“<br />
<br />
=== Linux ===<br />
<br />
Linux users are advised to use x2go <br />
<br />
* Download x2go client from https://wiki.x2go.org/doku.php/download:start<br />
<br />
* Enter the hostname portal1.kip.uni-heidelberg.de or portal2.kip.uni-heidelberg.de with port 22<br />
<br />
If no connection can be made, please log on to https://portal.kip.uni-heidelberg.de/, read the IP address in the right column and write to weis@kip.ui-heidelberg.de</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Windows_Remote_Desktop&diff=37639EDV:Windows Remote Desktop2020-03-24T15:02:11Z<p>Kala: /* Remote Desktop Connection */</p>
<hr />
<div>= How to access your PC remotely =<br />
<br />
To connect your PC remotely, you need to have a VPN Client installed in your laptop/PC. There are two VPN Clients<br />
Install one of the clients below.<br />
<br />
* OpenVPN<br />
* Cisco Anyconnect<br />
<br />
=== Install OpenVPN Client (preferred - KIP VPN server) ===<br />
<br />
* Goto "http://portal.kip.uni-heidelberg.de/kipvpn" and login with your KIP-Account<br />
<br />
* Depends on your Windows version download <br />
"openvpn-install-2.4.8-I602-Win7.exe (Win 7 lokale Kopie der Installationsdatei)" or <br />
"openvpn-install-2.4.8-I602-Win10.exe (Win 10 lokale Kopie der Installationsdatei)" and install it.<br />
<br />
* Download the zip file of the configuration files, unzip, copy or move the files to "c:\Program Files\OpenVPN\config"<br />
<br />
* Click on "OpenVPN-GUI" in the start menu, you can see an openVPN icon in the system tray(right bottom corner). Right click on the icon, click on "Connect"<br />
<br />
* Login with kip username & password. Now you are in the KIP network.<br />
<br />
<br />
=== Install Cisco Anyconnect VPN Client (URZ VPN Server)===<br />
<br />
* Download Cisco Anyconnect VPN Client from here, https://nextcloud.kip.uni-heidelberg.de/nextcloud/s/TBoFBgaas8YXENd<br />
<br />
* Double click to install, once done, open Cisco AnyConnect Client<br />
<br />
* Choose the server "Uni Heidelberg-vpnsrv1" (vpnsrv1.urz.uni-heidelberg.de) then click on "Connect"<br />
<br />
User name: kipusername@kip.uni-heidelberg.de (not your email-id)<br />
Password : your KIP Password<br />
<br />
*Click on "Accept"<br />
<br />
Now you are in the KIP network & the next step is to establish the connection remotely.<br />
<br />
=== Remote Desktop Connection ===<br />
<br />
* Hold "windows button" and hit "s", search for Remote Desktop Connection & Click<br />
<br />
* Enter your computer name, for example "xyz-pc", click on "Connect"<br />
<br />
* Enter your user name & password that you used to login into your PC (not your kip username/password)<br />
<br />
* Click on Connect<br />
<br />
Now you can start working from home remotely!<br />
<br />
[[Category:EDV|WLAN]]<br />
[[Category:EDV_HowTo|WLAN]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Windows_Remote_Desktop&diff=37638EDV:Windows Remote Desktop2020-03-24T15:01:36Z<p>Kala: /* How to access your PC remotely */</p>
<hr />
<div>= How to access your PC remotely =<br />
<br />
To connect your PC remotely, you need to have a VPN Client installed in your laptop/PC. There are two VPN Clients<br />
Install one of the clients below.<br />
<br />
* OpenVPN<br />
* Cisco Anyconnect<br />
<br />
=== Install OpenVPN Client (preferred - KIP VPN server) ===<br />
<br />
* Goto "http://portal.kip.uni-heidelberg.de/kipvpn" and login with your KIP-Account<br />
<br />
* Depends on your Windows version download <br />
"openvpn-install-2.4.8-I602-Win7.exe (Win 7 lokale Kopie der Installationsdatei)" or <br />
"openvpn-install-2.4.8-I602-Win10.exe (Win 10 lokale Kopie der Installationsdatei)" and install it.<br />
<br />
* Download the zip file of the configuration files, unzip, copy or move the files to "c:\Program Files\OpenVPN\config"<br />
<br />
* Click on "OpenVPN-GUI" in the start menu, you can see an openVPN icon in the system tray(right bottom corner). Right click on the icon, click on "Connect"<br />
<br />
* Login with kip username & password. Now you are in the KIP network.<br />
<br />
<br />
=== Install Cisco Anyconnect VPN Client (URZ VPN Server)===<br />
<br />
* Download Cisco Anyconnect VPN Client from here, https://nextcloud.kip.uni-heidelberg.de/nextcloud/s/TBoFBgaas8YXENd<br />
<br />
* Double click to install, once done, open Cisco AnyConnect Client<br />
<br />
* Choose the server "Uni Heidelberg-vpnsrv1" (vpnsrv1.urz.uni-heidelberg.de) then click on "Connect"<br />
<br />
User name: kipusername@kip.uni-heidelberg.de (not your email-id)<br />
Password : your KIP Password<br />
<br />
*Click on "Accept"<br />
<br />
Now you are in the KIP network & the next step is to establish the connection remotely.<br />
<br />
== Remote Desktop Connection ==<br />
<br />
* Hold "windows button" and hit "s", search for Remote Desktop Connection & Click<br />
<br />
* Enter your computer name, for example "xyz-pc", click on "Connect"<br />
<br />
* Enter your user name & password that you used to login into your PC (not your kip username/password)<br />
<br />
* Click on Connect<br />
<br />
Now you can start working from home remotely!<br />
<br />
[[Category:EDV|WLAN]]<br />
[[Category:EDV_HowTo|WLAN]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Windows_Remote_Desktop&diff=37632EDV:Windows Remote Desktop2020-03-24T11:21:24Z<p>Kala: /* How to access your PC remotely */</p>
<hr />
<div>= How to access your PC remotely =<br />
<br />
To connect your PC remotely, you need to have a VPN Client installed in your laptop. Here are the steps to install it.<br />
<br />
== Install Cisco Anyconnect VPN Client ==<br />
<br />
* Download Cisco Anyconnect VPN Client from here, https://nextcloud.kip.uni-heidelberg.de/nextcloud/s/TBoFBgaas8YXENd<br />
<br />
* Double click to install, once done, open Cisco AnyConnect Client<br />
<br />
* Choose the server "Uni Heidelberg-vpnsrv1" (vpnsrv1.urz.uni-heidelberg.de) then click on "Connect"<br />
<br />
User name: kipusername@kip.uni-heidelberg.de (not your email-id)<br />
Password : your KIP Password<br />
<br />
*Click on "Accept"<br />
<br />
Now you are in the KIP network & the next step is to establish the connection remotely.<br />
<br />
== Remote Desktop Connection ==<br />
<br />
* Hold "windows button" and hit "s", search for Remote Desktop Connection & Click<br />
<br />
* Enter your computer name, for example "xyz-pc", click on "Connect"<br />
<br />
* Enter your user name & password that you used to login into your PC (not your kip username/password)<br />
<br />
* Click on Connect<br />
<br />
Now you can start working from home remotely!<br />
<br />
[[Category:EDV|WLAN]]<br />
[[Category:EDV_HowTo|WLAN]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Windows_Remote_Desktop&diff=37587EDV:Windows Remote Desktop2020-03-16T16:01:06Z<p>Kala: Created page with "= How to access your PC remotely = To connect your PC remotely, you need to have a VPN Client installed in your laptop. Here are the steps to install it. == Install Cisco An..."</p>
<hr />
<div>= How to access your PC remotely =<br />
<br />
To connect your PC remotely, you need to have a VPN Client installed in your laptop. Here are the steps to install it.<br />
<br />
== Install Cisco Anyconnect VPN Client ==<br />
<br />
* Download Cisco Anyconnect VPN Client from here, https://nextcloud.kip.uni-heidelberg.de/nextcloud/s/TBoFBgaas8YXENd<br />
<br />
* Double click to install, once done, open Cisco AnyConnect Client<br />
<br />
* Choose the server "Uni Heidelberg-vpn-ac" then click on "Connect"<br />
<br />
User name: kipusername@kip.uni-heidelberg.de (not your email-id)<br />
Password : your KIP Password<br />
<br />
*Click on "Accept"<br />
<br />
Now you are in the KIP network & the next step is to establish the connection remotely. <br />
<br />
== Remote Desktop Connection ==<br />
<br />
* Hold "windows button" and hit "s", search for Remote Desktop Connection & Click<br />
<br />
* Enter your computer name, for example "xyz-pc", click on "Connect"<br />
<br />
* Enter your user name & password that you used to login into your PC (not your kip username/password)<br />
<br />
* Click on Connect<br />
<br />
Now you can start working from home remotely!<br />
<br />
[[Category:EDV|WLAN]]<br />
[[Category:EDV_HowTo|WLAN]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Content&diff=37586EDV:Content2020-03-16T15:05:44Z<p>Kala: /* HowTos */</p>
<hr />
<div>__NOTOC__<br />
= Hauptseite der IT =<br />
<br />
'''[http://www.kip.uni-heidelberg.de/service/computing IT-Abteilung]''' auf www.kip.uni-heidelberg.de<br />
<br />
== [[EDV:HowTo|HowTos]] ==<br />
* [[EDV:GastRechner|Netzzugang für Gastrechner]]<br />
* [[EDV:NewSystem|Neues Linux System einrichten / installieren]]<br />
* [[EDV:ITSM|ITSM/ADSM-Backup]] einrichten<br />
* [[EDV:WebSeitenEditieren|KIP-Webseiten editieren]]<br />
* [[EDV:MailQuota|Mail Quota (Speicherplatz-Limitierung)]]<br />
* [[EDV:KIPProxy|KIP-Proxy]] (HTTP und [[EDV:KIPProxy/SOCKS|SOCKS]])<br />
* [[EDV:MUA|Mail Clients]] -[[Einrichtung von Thunderbird| Thunderbird]] und [[Einrichtung von Outlook|Outlook]] mit KIP-Mail<br />
* [[EDV:EDUROAM|WLAN Zugang über Eduroam]]<br />
*[[EDV:HowTo:Windows|Windows]]<br />
* [[EDV:Windows Remote Desktop]] - Home Office users<br />
* weitere/alle [[EDV:HowTo|HowTo]]s (im Wiki)<br />
<br />
== Services ==<br />
* [[EDV:LoginServer|Login-Server]] <br />
* [[KIP-AFS]] (zentrales Netzwerkdateisystem) ([[EDV:OpenAFS/FAQ|AFS-FAQ]])<br />
* [[EDV:Drucker|Drucker]] <br />
* [[EDV:Scanner|Scannen von Dokumenten]]<br />
* [[EDV:PDF-Konverter|Konvertieren von Dokumenten nach PDF]]<br />
* [[EDV:KIP-Account|KIP-Account]] ([https://portal.kip.uni-heidelberg.de/account/ Login und eigene Informationen])<br />
* [[EDV:KIP-Portal|KIP-Portal]] ([http://portal.kip.uni-heidelberg.de Link zum KIP-Portal])<br />
* [[EDV:KIP-Mail|KIP-Mail]] ([http://mail.kip.uni-heidelberg.de/newhorde WebMail])<br />
* [[EDV:KIP-Jabber|KIP-Jabber]] (Instant Messaging)<br />
* [http://argus.kip.uni-heidelberg.de/adsm-control/ ADSM-Control]<br />
* [[EDV:Host-DB|Host-Datenbank]] (Verwaltung der [[EDV:Netzwerke|Netzwerke im KIP]])<br />
* [[EDV:LTSP|LTSP]] (Linux Terminal Server Project)<br />
* [[EDV:Videokonferenz|Videokonferenzsysteme]]<br />
* [[EDV:Datensynchronisation|Datensynchronisation - Cloud-Web-Dienste ]]<br />
* [[EDV:ThinClients|ThinClients (aka Shuttles) ]]<br />
<br />
== [[EDV:Info|Infos]] ==<br />
* [[EDV:BW-PC-2008|Informationen zum BW-PC 2008]]<br />
* [[EDV:BW-PC|Informationen zum BW-PC 2007]]<br />
* [[EDV:BW-Notebook|Informationen zum BW-Notebook]]<br />
* [[EDV:NEC-Server|Informationen zum NEC Dual Xeon Server]]<br />
* [[EDV:Netzwerk-FAQ|Fragen und Antworten zum KIP Netzwerk]]<br />
* [[EDV:URZ|Info zum URZ]]<br />
<br />
== Links ==<br />
<br />
* [[EDV:KIP-Wurzelzertifikat|KIP-Wurzelzertifikat]]<br />
* [[EDV:CIP-Pool|CIP-Pool]]<br />
* [[EDV:Uebungen|Anleitungen zur Übungsgruppenverwaltung]]<br />
<br />
<br />
[[Category:EDV|Content]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:LoginServer&diff=37068EDV:LoginServer2019-10-01T15:11:29Z<p>Kala: /* Server Hardware */</p>
<hr />
<div>= [[EDV:LoginServer|Login-Server]] im [[KIP]] =<br />
<br />
Diese Server stehen allen Mitgliedern des KIP (mit einem gültigen Account) zur Verfügung. <br />
Manche Maschinen sind auch von ausserhalb des Institutsnetzwerks erreichbar. Details dazu siehe [http://portal.kip.uni-heidelberg.de]<br />
<br />
Falls Probleme bei der Anmeldung oder Benutzung der Systeme auftreten, oder wenn <br />
Sie bestimmte Programme vermissen, teilen Sie [http://www.kip.uni-heidelberg.de/service/computing/staff uns] das bitte mit.<br />
<br />
Entweder per E-mail an '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]''', oder gerne auch persönlich bei der [http://www.kip.uni-heidelberg.de/service/computing EDV-Abteilung] im 3.OG.<br />
<br />
== Server Hardware ==<br />
{| {{Prettytable}}<br />
! Servername*<br />
! Betriebssystem<br />
! Prozessor<br />
! RAM<br />
|-<br />
| kip1<br />
| Debian GNU/Linux 7 32-Bit<br />
| 4 x AMD Opteron 848 @ 2,2 GHz<br />
| 8 GB<br />
|-<br />
| kip2<br />
| Ubuntu 14.04 LTS 32-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin1<br />
| Windows 2008R2 64-Bit<br />
| 2 x AMD Opteron 246 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin2<br />
| Windows 2008R2 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp2<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp3<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp4<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| ltsp5<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp6<br />
| Debian GNU/Linux 7 64-Bit<br />
| 4 x 6 Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| ltsp7<br />
| Debian GNU/Linux 7 64-Bit<br />
| 4 x 6 Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| portal1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| portal2<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|}<br />
<br />
* Ist nur der Hostname - für den vollqualifizierten Internet-Host-Namen muss noch " .kip.uni-heidelberg.de " angehängt werden.<br />
<br />
== Dienste ==<br />
<br />
{| {{Prettytable}}<br />
| Servername*<br />
| ssh<br />
| thinlinc<br />
| x2go<br />
| rdp <br />
|-<br />
| kip1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kip2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kipfire<br />
| yes<br />
| no<br />
| no<br />
| no<br />
|-<br />
| kipwin<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| kipwin2<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| ltsp1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp3<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp4<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp5<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp6<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp7<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|}<br />
<br />
<br />
<br />
[[Category:EDV|LoginServer]]<br />
[[Category:Linux|LoginServer]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:LoginServer&diff=37056EDV:LoginServer2019-10-01T13:34:18Z<p>Kala: /* Server Hardware */</p>
<hr />
<div>= [[EDV:LoginServer|Login-Server]] im [[KIP]] =<br />
<br />
Diese Server stehen allen Mitgliedern des KIP (mit einem gültigen Account) zur Verfügung. <br />
Manche Maschinen sind auch von ausserhalb des Institutsnetzwerks erreichbar. Details dazu siehe [http://portal.kip.uni-heidelberg.de]<br />
<br />
Falls Probleme bei der Anmeldung oder Benutzung der Systeme auftreten, oder wenn <br />
Sie bestimmte Programme vermissen, teilen Sie [http://www.kip.uni-heidelberg.de/service/computing/staff uns] das bitte mit.<br />
<br />
Entweder per E-mail an '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]''', oder gerne auch persönlich bei der [http://www.kip.uni-heidelberg.de/service/computing EDV-Abteilung] im 3.OG.<br />
<br />
== Server Hardware ==<br />
{| {{Prettytable}}<br />
! Servername*<br />
! Betriebssystem<br />
! Prozessor<br />
! RAM<br />
|-<br />
| kip1<br />
| Debian GNU/Linux 7 32-Bit<br />
| 4 x AMD Opteron 848 @ 2,2 GHz<br />
| 8 GB<br />
|-<br />
| kip2<br />
| Ubuntu 14.04 LTS 32-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin1<br />
| Windows 2008R2 64-Bit<br />
| 2 x AMD Opteron 246 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin2<br />
| Windows 2008R2 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp2<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp3<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp4<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| ltsp5<br />
| Debian GNU/Linux 9.11 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp6<br />
| Debian GNU/Linux 7 64-Bit<br />
| 24 x Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| ltsp7<br />
| Debian GNU/Linux 7 64-Bit<br />
| 24 x Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| portal1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| portal2<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|}<br />
<br />
* Ist nur der Hostname - für den vollqualifizierten Internet-Host-Namen muss noch " .kip.uni-heidelberg.de " angehängt werden.<br />
<br />
== Dienste ==<br />
<br />
{| {{Prettytable}}<br />
| Servername*<br />
| ssh<br />
| thinlinc<br />
| x2go<br />
| rdp <br />
|-<br />
| kip1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kip2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kipfire<br />
| yes<br />
| no<br />
| no<br />
| no<br />
|-<br />
| kipwin<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| kipwin2<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| ltsp1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp3<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp4<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp5<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp6<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp7<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|}<br />
<br />
<br />
<br />
[[Category:EDV|LoginServer]]<br />
[[Category:Linux|LoginServer]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:LoginServer&diff=37055EDV:LoginServer2019-10-01T13:32:21Z<p>Kala: /* Dienste */</p>
<hr />
<div>= [[EDV:LoginServer|Login-Server]] im [[KIP]] =<br />
<br />
Diese Server stehen allen Mitgliedern des KIP (mit einem gültigen Account) zur Verfügung. <br />
Manche Maschinen sind auch von ausserhalb des Institutsnetzwerks erreichbar. Details dazu siehe [http://portal.kip.uni-heidelberg.de]<br />
<br />
Falls Probleme bei der Anmeldung oder Benutzung der Systeme auftreten, oder wenn <br />
Sie bestimmte Programme vermissen, teilen Sie [http://www.kip.uni-heidelberg.de/service/computing/staff uns] das bitte mit.<br />
<br />
Entweder per E-mail an '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]''', oder gerne auch persönlich bei der [http://www.kip.uni-heidelberg.de/service/computing EDV-Abteilung] im 3.OG.<br />
<br />
== Server Hardware ==<br />
{| {{Prettytable}}<br />
! Servername*<br />
! Betriebssystem<br />
! Prozessor<br />
! RAM<br />
|-<br />
| kip1<br />
| Debian GNU/Linux 7 32-Bit<br />
| 4 x AMD Opteron 848 @ 2,2 GHz<br />
| 8 GB<br />
|-<br />
| kip2<br />
| Ubuntu 14.04 LTS 32-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin1<br />
| Windows 2008R2 64-Bit<br />
| 2 x AMD Opteron 246 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin2<br />
| Windows 2008R2 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp2<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp3<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp4<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| ltsp5<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp6<br />
| Debian GNU/Linux 7 64-Bit<br />
| 24 x Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| ltsp7<br />
| Debian GNU/Linux 7 64-Bit<br />
| 24 x Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| portal1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| portal2<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|}<br />
<br />
* Ist nur der Hostname - für den vollqualifizierten Internet-Host-Namen muss noch " .kip.uni-heidelberg.de " angehängt werden.<br />
<br />
== Dienste ==<br />
<br />
{| {{Prettytable}}<br />
| Servername*<br />
| ssh<br />
| thinlinc<br />
| x2go<br />
| rdp <br />
|-<br />
| kip1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kip2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kipfire<br />
| yes<br />
| no<br />
| no<br />
| no<br />
|-<br />
| kipwin<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| kipwin2<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| ltsp1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp3<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp4<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp5<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp6<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp7<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|}<br />
<br />
<br />
<br />
[[Category:EDV|LoginServer]]<br />
[[Category:Linux|LoginServer]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:LoginServer&diff=37054EDV:LoginServer2019-10-01T13:30:57Z<p>Kala: /* Server Hardware */</p>
<hr />
<div>= [[EDV:LoginServer|Login-Server]] im [[KIP]] =<br />
<br />
Diese Server stehen allen Mitgliedern des KIP (mit einem gültigen Account) zur Verfügung. <br />
Manche Maschinen sind auch von ausserhalb des Institutsnetzwerks erreichbar. Details dazu siehe [http://portal.kip.uni-heidelberg.de]<br />
<br />
Falls Probleme bei der Anmeldung oder Benutzung der Systeme auftreten, oder wenn <br />
Sie bestimmte Programme vermissen, teilen Sie [http://www.kip.uni-heidelberg.de/service/computing/staff uns] das bitte mit.<br />
<br />
Entweder per E-mail an '''[mailto:edv@kip.uni-heidelberg.de edv@kip.uni-heidelberg.de]''', oder gerne auch persönlich bei der [http://www.kip.uni-heidelberg.de/service/computing EDV-Abteilung] im 3.OG.<br />
<br />
== Server Hardware ==<br />
{| {{Prettytable}}<br />
! Servername*<br />
! Betriebssystem<br />
! Prozessor<br />
! RAM<br />
|-<br />
| kip1<br />
| Debian GNU/Linux 7 32-Bit<br />
| 4 x AMD Opteron 848 @ 2,2 GHz<br />
| 8 GB<br />
|-<br />
| kip2<br />
| Ubuntu 14.04 LTS 32-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin1<br />
| Windows 2008R2 64-Bit<br />
| 2 x AMD Opteron 246 1,8 GHz<br />
| 8 GB<br />
|-<br />
| kipwin2<br />
| Windows 2008R2 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp2<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp3<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x AMD Opteron 246 @ 1,8 GHz<br />
| 4 GB<br />
|-<br />
| ltsp4<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| ltsp5<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 16 GB<br />
|-<br />
| ltsp6<br />
| Debian GNU/Linux 7 64-Bit<br />
| 24 x Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| ltsp7<br />
| Debian GNU/Linux 7 64-Bit<br />
| 24 x Intel Xeon E52620 2,40 GHz<br />
| 32 GB<br />
|-<br />
| portal1<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|-<br />
| portal2<br />
| Debian GNU/Linux 7 64-Bit<br />
| 2 x Intel Xeon E5472 3,0 GHz<br />
| 8 GB<br />
|}<br />
<br />
* Ist nur der Hostname - für den vollqualifizierten Internet-Host-Namen muss noch " .kip.uni-heidelberg.de " angehängt werden.<br />
<br />
== Dienste ==<br />
<br />
{| {{Prettytable}}<br />
| Servername*<br />
| ssh<br />
| thinlinc<br />
| x2go<br />
| rdp <br />
|-<br />
| kip1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kip2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| kipfire<br />
| yes<br />
| no<br />
| no<br />
| no<br />
|-<br />
| kipwin<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| kipwin2<br />
| no<br />
| no<br />
| no<br />
| yes<br />
|-<br />
| ltsp1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp3<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp4<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| ltsp5<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal1<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|-<br />
| portal2<br />
| yes<br />
| yes<br />
| yes<br />
| no<br />
|}<br />
<br />
<br />
<br />
[[Category:EDV|LoginServer]]<br />
[[Category:Linux|LoginServer]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conferneces_with_Graz&diff=36922EDV:Conferneces with Graz2019-08-07T12:54:05Z<p>Kala: Kala moved page EDV:Conferneces with Graz to EDV:Conferences with Graz</p>
<hr />
<div>#REDIRECT [[EDV:Conferences with Graz]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conferences_with_Graz&diff=36921EDV:Conferences with Graz2019-08-07T12:54:05Z<p>Kala: Kala moved page EDV:Conferneces with Graz to EDV:Conferences with Graz</p>
<hr />
<div>Zunächst müssen sie das Touch-Display einschalten und zusätzlich den Audio-Adapter (Mikrofon-/Lautsprecherkombination) über die USB-Buchse am Touch-Display an den PC anstecken:<br />
<br />
[[File:Ueberblick.jpg|Knöpfe und Buchsen am Touch-Display]]<br />
<br />
Wird nach dem Einschalten nicht die Windows-Oberfläche des PCs angezeigt, müssen sie zunächst den Eingang am Touch-Display durch einen Druck auf "Quelle" ändern. Es wird dann eine Menüzeile angezeigt, dort müssen sie auf "Open" drücken und dann "HDMI1" auswählen:<br />
<br />
[[File:Quelle.png|Auswahl des Signaleingangs]]<br />
<br />
Sollte auch danach keine Oberfläche angezeigt werden, müssen sie prüfen, ob der PC überhaupt an ist:<br />
<br />
[[File:PC.png|Einschalten des PCs]]<br />
<br />
Nun müssen sie als Browser "Opera" öffnen (Rotes O in Startleiste) und dann die Seite [https://conf.dfn.de/webapp/conference/97968036 https://conf.dfn.de/webapp/conference/97968036] öffnen. Darauf öffnet sich der Login-Screen für die Konferenz, hier müssen sie das Passwort eingeben (sie bekommen es von [mailto:ostrowski@uni-heidelberg.de Herrn Ostrowski]).<br />
<br />
[[File:Login.png|Login DFN-Konferenz-Oberfläche]]<br />
<br />
Nun wird die Konferenz-Seite angezeigt. Zunächst sollten sie sicherstellen, dass er auch die korrekten Geräte nutzt (Lautsprecher, Mikrofon und Kamera). Dazu einfach auf die drei Punkte (...) klicken und dann "Select media devices" anwählen:<br />
<br />
[[File:Control.png|Konfiguration]]<br />
<br />
Hier kann nun eine Kamera, ein Lautsprecher und ein Mikrofon ausgewählt werden. (Die Lautstärke lässt sich über das Lautsprechersymbol in der Startleiste oder die Fernbedienung des Touch-Displays ändern.)<br />
<br />
[[File:Audio-Video.png|Geräteauswahl]]<br />
<br />
Dabei ist "SyncMaster (Intel(R) Display ...)" der Lautsprecher des Touch-Display, "Mikrofon (Phnx MT202pcs) ..." das Mikrofon der Lautsprecher-/Mikrofon-Kombination.</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conf.dfn.de&diff=36920EDV:Conf.dfn.de2019-08-07T12:48:56Z<p>Kala: </p>
<hr />
<div>DFN offers an own system for web conferences. <br />
<br />
== Join a conference ==<br />
<br />
Open [https://conf.dfn.de https://conf.dfn.de], use the conference number you received from the invitation & you can see the participants on the left (You have to enter the pin if only selected guests are to be participated).<br />
<br />
To set up your system click on the three dots on the left & choose "Select media device", here you can select the speaker, microphone and the camera.<br />
<br />
To test your settings you can join a [https://conf.dfn.de/webapp/conference/9791?name=Test "testcall"].<br />
<br />
== Set up an own conference ==<br />
<br />
Here are the steps to follow.<br />
<br />
Go to [https://my.conf.dfn.de/disco/ https://my.conf.dfn.de/disco/], choose "Universität Heidelberg" and login with your Uni-Account (e.g. xx123) (or select the organization that provides you the account)<br />
<br />
To create a new conference select "NEUER MEETINGRAUM" & enter a name (e.g. "KIP EDV") and a pin (e.g. "1234"). <br />
<br />
For additional settings, click on "Mehr Einstellungen" to have the below options.<br />
<br />
* Beschreibung - Description of the meeting<br />
<br />
* Gäste erlauben - Allow guest access <br />
<br />
* Gäste-PIN - Pin for the guests<br />
<br />
* Gäste dürfen präsentieren - Are guests allowed to present or only to view others?<br />
<br />
* Chat aktivieren - This enables the users having Skype for Business, Lync or Infinity Connect to participate<br />
<br />
* Layout - Sets up the layout of the conference page - <br />
- Shall only the speaker be shown ("Full-screen main speaker only (1 + 0 layout)") or<br />
- also the other participants (up to 7: "Large main speaker and up to 7 other participants (1 + 7 layout)") or<br />
- (up to 21: "Small main speaker and up to 21 other participants (1 + 21 layout)"). <br />
<br />
* Teilnehmernamen anzeigen - whether to show the name of the participants or not<br />
<br />
* Alle Gäste stummschalten - If activated then it will mute all the devices. The audio can be activated through the web interface<br />
<br />
* Präsentierer als Hauptsprecher festlegen - whether to show the presenter as leading speaker or not<br />
<br />
* Leistungsmermale des Meetingraums - select what should be offered -<br />
- Main Video + presentation <br />
- Audio only <br />
- Main Video only<br />
<br />
* Teilnehmerbegrenzung - set maximum number of participants<br />
<br />
<br />
[[File:DFN-Login.png|Login to create a new conference]]<br />
<br />
Login with your Uni-account:<br />
<br />
[[File:URZ-Login.png|Login with Uni-account]]<br />
<br />
Create a conference with the basic settings:<br />
<br />
[[File:NeuerMeetingraum.png|Create a new conference]]<br />
<br />
Additional settings:<br />
<br />
[[File:AdditionalSettings.png|Additional conference settings]]<br />
<br />
-> [[EDV:Conferences with Graz]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conf.dfn.de&diff=36919EDV:Conf.dfn.de2019-08-07T12:20:03Z<p>Kala: </p>
<hr />
<div>DFN offers an own system for web conferences. <br />
<br />
== Join a conference ==<br />
<br />
Open [https://conf.dfn.de https://conf.dfn.de], use the conference number you received from the invitation & you can see the participants on the left (You have to enter the pin if only selected guests are to be participated).<br />
<br />
To set up your system click on the three dots on the left & choose "Select media device", here you can select the speaker, microphone and the camera.<br />
<br />
To test your settings you can join a [https://conf.dfn.de/webapp/conference/9791?name=Test "testcall"].<br />
<br />
== Set up an own conference ==<br />
<br />
Here are the steps to follow.<br />
<br />
Go to [https://my.conf.dfn.de/disco/ https://my.conf.dfn.de/disco/], choose "Universität Heidelberg" and login with your Uni-Account (e.g. xx123) (or select the organization that provides you the account)<br />
<br />
To create a new conference select "NEUER MEETINGRAUM" & enter a name (e.g. "KIP EDV") and a pin (e.g. "1234"). <br />
<br />
For additional settings, click on "Mehr Einstellungen" to have the below options.<br />
<br />
* Beschreibung - Description of the meeting<br />
<br />
* Gäste erlauben - Allow guest access <br />
<br />
* Gäste-PIN - Pin for the guests<br />
<br />
* Gäste dürfen präsentieren - Are guests allowed to present or only to view others?<br />
<br />
* Chat aktivieren - This enables the users having Skype for Business, Lync or Infinity Connect to participate<br />
<br />
* Layout - Sets up the layout of the conference page - <br />
- Shall only the speaker be shown ("Full-screen main speaker only (1 + 0 layout)") or<br />
- also the other participants (up to 7: "Large main speaker and up to 7 other participants (1 + 7 layout)") or<br />
- (up to 21: "Small main speaker and up to 21 other participants (1 + 21 layout)"). <br />
<br />
* Teilnehmernamen anzeigen - whether to show the name of the participants or not<br />
<br />
* Alle Gäste stummschalten - If activated then it will mute all the devices. The audio can be activated through the web interface<br />
<br />
* Präsentierer als Hauptsprecher festlegen - whether to show the presenter as leading speaker or not<br />
<br />
* Leistungsmermale des Meetingraums - select what should be offered -<br />
- Main Video + presentation <br />
- Audio only <br />
- Main Video only<br />
<br />
* Teilnehmerbegrenzung - set maximum number of participants<br />
<br />
<br />
[[File:DFN-Login.png|Login to create a new conference]]<br />
<br />
Login with your Uni-account:<br />
<br />
[[File:URZ-Login.png|Login with Uni-account]]<br />
<br />
Create a conference with the basic settings:<br />
<br />
[[File:NeuerMeetingraum.png|Create a new conference]]<br />
<br />
Additional settings:<br />
<br />
[[File:AdditionalSettings.png|Additional conference settings]]<br />
<br />
-> [[EDV:Conferneces with Graz]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conf.dfn.de&diff=36918EDV:Conf.dfn.de2019-08-07T12:17:52Z<p>Kala: </p>
<hr />
<div>DFN offers an own system for web conferences. <br />
<br />
== Join a conference ==<br />
<br />
Open [https://conf.dfn.de https://conf.dfn.de], use the conference number you received from the invitation & you can see the participants on the left (You have to enter the pin if only selected guests are to be participated).<br />
<br />
To set up your system click on the three dots on the left & choose "Select media device", here you can select the speaker, microphone and the camera.<br />
<br />
To test your settings you can join a [https://conf.dfn.de/webapp/conference/9791?name=Test "testcall"].<br />
<br />
== Set up an own conference ==<br />
<br />
Here are the steps to follow.<br />
<br />
Go to [https://my.conf.dfn.de/disco/ https://my.conf.dfn.de/disco/], choose "Universität Heidelberg" and login with your Uni-Account (e.g. xx123) (or select the organization that provides you the account)<br />
<br />
To create a new conference select "NEUER MEETINGRAUM" & enter a name (e.g. "KIP EDV") and a pin (e.g. "1234"). <br />
<br />
For additional settings, click on "Mehr Einstellungen" to have the below options.<br />
<br />
* Beschreibung - Description of the meeting<br />
<br />
* Gäste erlauben - Allow guest access <br />
<br />
* Gäste-PIN - Pin for the guests<br />
<br />
* Gäste dürfen präsentieren - Are guests allowed to present or only to view others?<br />
<br />
* Chat aktivieren - This enables the users having Skype for Business, Lync or Infinity Connect to participate<br />
<br />
* Layout - Sets up the layout of the conference page - <br />
* Shall only the speaker be shown ("Full-screen main speaker only (1 + 0 layout)") or<br />
* also the other participants (up to 7: "Large main speaker and up to 7 other participants (1 + 7 layout)") or<br />
* (up to 21: "Small main speaker and up to 21 other participants (1 + 21 layout)"). <br />
<br />
* Teilnehmernamen anzeigen - whether to show the name of the participants or not<br />
<br />
* Alle Gäste stummschalten - If activated then it will mute all the devices. The audio can be activated through the web interface<br />
<br />
* Präsentierer als Hauptsprecher festlegen - whether to show the presenter as leading speaker or not<br />
<br />
* Leistungsmermale des Meetingraums - select what should be offered -<br />
* Main Video + presentation <br />
* Audio only <br />
* Main Video only<br />
<br />
* Teilnehmerbegrenzung - set maximum number of participants<br />
<br />
<br />
[[File:DFN-Login.png|Login to create a new conference]]<br />
<br />
Login with your Uni-account:<br />
<br />
[[File:URZ-Login.png|Login with Uni-account]]<br />
<br />
Create a conference with the basic settings:<br />
<br />
[[File:NeuerMeetingraum.png|Create a new conference]]<br />
<br />
Additional settings:<br />
<br />
[[File:AdditionalSettings.png|Additional conference settings]]<br />
<br />
-> [[EDV:Conferneces with Graz]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conf.dfn.de&diff=36917EDV:Conf.dfn.de2019-08-07T11:11:15Z<p>Kala: </p>
<hr />
<div>DFN offers an own system for web conferences. <br />
<br />
== Join a conference ==<br />
<br />
Open [https://conf.dfn.de https://conf.dfn.de], use the conference number you received from the inviter & you can see the participants on the left(You have to enter the pin if only selected guests are to be participated).<br />
<br />
To set up your system click on the three dots on the left & choose "Select media device", here you can select the speaker, microphone and the camera.<br />
<br />
To test your settings you can join a [https://conf.dfn.de/webapp/conference/9791?name=Test "testcall"].<br />
<br />
== Set up an own conference ==<br />
<br />
Here are the steps to follow.<br />
<br />
Go to [https://my.conf.dfn.de/disco/ https://my.conf.dfn.de/disco/], choose "Universität Heidelberg" and login with your Uni-Account (e.g. xx123) (or select the organization that provides you the account)<br />
<br />
To create a new conference select "NEUER MEETINGRAUM" & enter a name (e.g. "KIP EDV") and a pin (e.g. "1234"). <br />
<br />
For additional settings, click on "Mehr Einstellungen" to have the below options.<br />
<br />
* Beschreibung - Description of the meeting<br />
<br />
* Gäste erlauben - Allow guest access <br />
<br />
* Gäste-PIN - Pin for the guests<br />
<br />
* Gäste dürfen präsentieren - Are guests allowed to present or only to view others?<br />
<br />
* Chat aktivieren - This enables the users having Skype for Business, Lync or Infinity Connect to participate<br />
<br />
* Layout - Sets up the layout of the conference page - <br />
* Shall only the speaker be shown ("Full-screen main speaker only (1 + 0 layout)") or<br />
* also the other participants (up to 7: "Large main speaker and up to 7 other participants (1 + 7 layout)") or<br />
* (up to 21: "Small main speaker and up to 21 other participants (1 + 21 layout)"). <br />
<br />
* Teilnehmernamen anzeigen - whether to show the name of the participants or not<br />
<br />
* Alle Gäste stummschalten - If activated then it will mute all the devices. The audio can be activated through the web interface<br />
<br />
* Präsentierer als Hauptsprecher festlegen - whether to show the presenter as leading speaker or not<br />
<br />
* Leistungsmermale des Meetingraums - select what should be offered -<br />
* Main Video + presentation <br />
* Audio only <br />
* Main Video only<br />
<br />
* Teilnehmerbegrenzung - set maximum number of participants<br />
<br />
<br />
[[File:DFN-Login.png|Login to create a new conference]]<br />
<br />
Login with your Uni-account:<br />
<br />
[[File:URZ-Login.png|Login with Uni-account]]<br />
<br />
Create a conference with the basic settings:<br />
<br />
[[File:NeuerMeetingraum.png|Create a new conference]]<br />
<br />
Additional settings:<br />
<br />
[[File:AdditionalSettings.png|Additional conference settings]]<br />
<br />
-> [[EDV:Conferneces with Graz]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Conf.dfn.de&diff=36915EDV:Conf.dfn.de2019-08-07T10:02:28Z<p>Kala: </p>
<hr />
<div>DFN offers an own system for web conferences. <br />
<br />
To join a conference, just open [https://conf.dfn.de conf.dfn.de], use the conference number you received from the inviter & you can see the participants on the left. (You have to enter the pin if only selected guests are to be participated)<br />
<br />
To set up your system click on the three dots on the left an choose "Select media device". Here you can select the speaker, microphone and the camera.<br />
<br />
To test your settings you can join a [https://conf.dfn.de/webapp/conference/9791?name=Test "testcall"].<br />
<br />
If you like to set up an own conference, go to [https://my.conf.dfn.de/disco/ my.conf.dfn.de/disco/], choose "Universität Heidelberg" and log in with your Uni-Account (like xx123). To create a new conference select "NEUER MEETINGRAUM +". Now give the meeting a name (here "KIP EDV") an a pin (with four to twenty numbers, for example "1234"). If you like to make additional settings, click on "Mehr Einstellungen (Show)". Here you can enter a description of the meeting ("Beschreibung"), allow the access to anybody ("Gäste erlauben") and set up a pin for the guests ("Gäste-PIN"). Further more you can decide, if only you will show papers to the guests or they shall also have the possibility to do it ("Gäste dürfen präsentieren"). If you enable "Chat aktivieren" also users using Skype for Business, Lync or Infinity Connect Clients may take part. The option "Layout" sets up the layout of the conference page - shall only the speaker be shown ("Full-screen main speaker only (1 + 0 layout)") or also the other participants (up to 7: "Large main speaker and up to 7 other participants (1 + 7 layout)", up to 21: "Small main speaker and up to 21 other participants (1 + 21 layout)"). The next options provide the possibilities to show the names of the participants ("Teilnehmernamen anzeigen"), to turn the guests dumb ("Alle Gäste stummschalten"), to show the presenter as leading speaker in the surface ("Präsentierer als Hauptsprecher festlegen"), select what everything should be offered ("Main Video + presentation", "Audio only", "Main Video only") and set up the maximum Users allowed to visit the meeting ("Teilnehmerbegrenzung").<br />
<br />
Select the university that provides the user account:<br />
<br />
[[File:DFN-Login.png|Login to create a new conference]]<br />
<br />
Login with your Uni-account:<br />
<br />
[[File:URZ-Login.png|Login with Uni-account]]<br />
<br />
Create a conference with the basic settings:<br />
<br />
[[File:NeuerMeetingraum.png|Create a new conference]]<br />
<br />
Additional settings:<br />
<br />
[[File:AdditionalSettings.png|Additional conference settings]]<br />
<br />
-> [[EDV:Conferneces with Graz]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:WLAN&diff=35101EDV:WLAN2018-03-14T09:42:16Z<p>Kala: /* Netzzugang */</p>
<hr />
<div>= WLAN =<br />
<br />
Alle nicht in der [[EDV:Host-DB|Gerätedatenbank]] angemeldeten Geräte, befinden sich im WLAN-Netz.<br />
(Mit WLAN ist man '''immer''' im WLAN-Netz.)<br />
<br />
== Netzzugang ==<br />
<br />
Um dann Internet verwenden zu können, wird ein URZ-Account und der Cisco-VPN-Client benötigt.<br />
<br />
* Informationsseite des URZ: https://urz.uni-heidelberg.de/de/wlan<br />
* Cisco-VPN-Client: https://urz.uni-heidelberg.de/de/vpn<br />
<br />
[[Category:EDV|WLAN]]<br />
[[Category:EDV_HowTo|WLAN]]</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34890EDV:Nextcloud2018-03-07T11:14:46Z<p>Kala: /* Using Owncloud Desktop client */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== '''Migration of data from Owncloud to Nextcloud''' ==<br />
<br />
This can be done in two ways as mentioned below<br />
<br />
* Using the Nextcloud web interface https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Using Owncloud desktop Client<br />
<br />
== Using web interface ==<br />
<br />
Once you logged into nextcloud https://nextcloud.kip.uni-heidelberg.de/nextcloud, you will find a new folder called "ownCloud-Daten" <br />
which is nothing but a folder having all your owncloud files.<br />
<br />
To migrate the data, follow the steps below.<br />
<br />
* Click the folder "ownCloud-Daten", you will be able to see all your Owncloud files<br />
<br />
* Select the folders/files that you would like to migrate to Nextcloud or select all by ticking the checkbox in the top, depends on user's choice.<br />
<br />
* Click "Move or copy", you find this icon on the top right (near Download), <br />
<br />
* In the target folder, you don't have to select anything just click on copy or move,then you will have all your migrated data in the home directory. But if you want to<br />
have them in a separate folder then create a new folder in the home directory, eg, "migrated-data" <br />
<br />
* Select the target folder "migrated-data" and click on copy or move, It should be noted that if you choose "move" then the data will be <br />
no longer available in owncloud.<br />
<br />
== Using Owncloud Desktop client ==<br />
<br />
If you are already using an Owncloud desktop client then you can easily synchronize your Owncloud files with the Nextcloud server by following the below <br />
<br />
steps and also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34889EDV:Nextcloud2018-03-07T11:13:45Z<p>Kala: /* Using Owncloud Desktop client */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== '''Migration of data from Owncloud to Nextcloud''' ==<br />
<br />
This can be done in two ways as mentioned below<br />
<br />
* Using the Nextcloud web interface https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Using Owncloud desktop Client<br />
<br />
== Using web interface ==<br />
<br />
Once you logged into nextcloud https://nextcloud.kip.uni-heidelberg.de/nextcloud, you will find a new folder called "ownCloud-Daten" <br />
which is nothing but a folder having all your owncloud files.<br />
<br />
To migrate the data, follow the steps below.<br />
<br />
* Click the folder "ownCloud-Daten", you will be able to see all your Owncloud files<br />
<br />
* Select the folders/files that you would like to migrate to Nextcloud or select all by ticking the checkbox in the top, depends on user's choice.<br />
<br />
* Click "Move or copy", you find this icon on the top right (near Download), <br />
<br />
* In the target folder, you don't have to select anything just click on copy or move,then you will have all your migrated data in the home directory. But if you want to<br />
have them in a separate folder then create a new folder in the home directory, eg, "migrated-data" <br />
<br />
* Select the target folder "migrated-data" and click on copy or move, It should be noted that if you choose "move" then the data will be <br />
no longer available in owncloud.<br />
<br />
== Using Owncloud Desktop client ==<br />
<br />
If you are already using an Owncloud desktop client then you can easily synchronize your Owncloud files with the <br />
<br />
Nextcloud server by following the below steps and also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34888EDV:Nextcloud2018-03-06T16:34:35Z<p>Kala: /* Using web interface */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== '''Migration of data from Owncloud to Nextcloud''' ==<br />
<br />
This can be done in two ways as mentioned below<br />
<br />
* Using the Nextcloud web interface https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Using Owncloud desktop Client<br />
<br />
== Using web interface ==<br />
<br />
Once you logged into nextcloud https://nextcloud.kip.uni-heidelberg.de/nextcloud, you will find a new folder called "ownCloud-Daten" <br />
which is nothing but a folder having all your owncloud files.<br />
<br />
To migrate the data, follow the steps below.<br />
<br />
* Click the folder "ownCloud-Daten", you will be able to see all your Owncloud files<br />
<br />
* Select the folders/files that you would like to migrate to Nextcloud or select all by ticking the checkbox in the top, depends on user's choice.<br />
<br />
* Click "Move or copy", you find this icon on the top right (near Download), <br />
<br />
* In the target folder, you don't have to select anything just click on copy or move,then you will have all your migrated data in the home directory. But if you want to<br />
have them in a separate folder then create a new folder in the home directory, eg, "migrated-data" <br />
<br />
* Select the target folder "migrated-data" and click on copy or move, It should be noted that if you choose "move" then the data will be <br />
no longer available in owncloud.<br />
<br />
== Using Owncloud Desktop client ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34887EDV:Nextcloud2018-03-06T16:33:45Z<p>Kala: /* Migration of data from Owncloud to Nextcloud */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== '''Migration of data from Owncloud to Nextcloud''' ==<br />
<br />
This can be done in two ways as mentioned below<br />
<br />
* Using the Nextcloud web interface https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Using Owncloud desktop Client<br />
<br />
== Using web interface ==<br />
<br />
Once you logged into nextcloud https://nextcloud.kip.uni-heidelberg.de/nextcloud, you will find<br />
<br />
a new folder called "ownCloud-Daten" which is nothing but a folder having all your owncloud files.<br />
<br />
To migrate the data, follow the steps below.<br />
<br />
* Click the folder "ownCloud-Daten", you will be able to see all your Owncloud files<br />
<br />
* Select the folders/files that you would like to migrate to Nextcloud or select all by ticking the checkbox in the top, depends on user's choice.<br />
<br />
* Click "Move or copy", you find this icon on the top right (near Download), <br />
<br />
* In the target folder, you don't have to select anything just click on copy or move,then you will have all your migrated data in the home directory. But if you want to<br />
have them in a separate folder then create a new folder in the home directory, eg, "migrated-data" <br />
<br />
* Select the target folder "migrated-data" and click on copy or move, It should be noted that if you choose "move" then the data will be <br />
no longer available in owncloud.<br />
<br />
<br />
== Using Owncloud Desktop client ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34886EDV:Nextcloud2018-03-06T16:33:09Z<p>Kala: /* Migration of data from Owncloud to Nextcloud */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== '''Migration of data from Owncloud to Nextcloud''' ==<br />
<br />
This can be done in two ways as mentioned below<br />
<br />
* Using the Nextcloud web interface <nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
* Using Owncloud desktop Client<br />
<br />
<br />
== Using web interface ==<br />
<br />
Once you logged into nextcloud https://nextcloud.kip.uni-heidelberg.de/nextcloud, you will find<br />
<br />
a new folder called "ownCloud-Daten" which is nothing but a folder having all your owncloud files.<br />
<br />
To migrate the data, follow the steps below.<br />
<br />
* Click the folder "ownCloud-Daten", you will be able to see all your Owncloud files<br />
<br />
* Select the folders/files that you would like to migrate to Nextcloud or select all by ticking the checkbox in the top, depends on user's choice.<br />
<br />
* Click "Move or copy", you find this icon on the top right (near Download), <br />
<br />
* In the target folder, you don't have to select anything just click on copy or move,then you will have all your migrated data in the home directory. But if you want to<br />
have them in a separate folder then create a new folder in the home directory, eg, "migrated-data" <br />
<br />
* Select the target folder "migrated-data" and click on copy or move, It should be noted that if you choose "move" then the data will be <br />
no longer available in owncloud.<br />
<br />
<br />
== Using Owncloud Desktop client ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34885EDV:Nextcloud2018-03-06T16:29:00Z<p>Kala: </p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
= Migration of data from Owncloud to Nextcloud =<br />
<br />
This can be done in two ways as mentioned below<br />
<br />
* Using the Nextcloud web interface <nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
* Using Owncloud desktop Client<br />
<br />
<br />
== Migration using web interface ==<br />
<br />
Once you logged into nextcloud (<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki>), you will find<br />
<br />
a new folder called "ownCloud-Daten" which is nothing but a folder having all your owncloud files.<br />
<br />
To migrate the data, follow the steps below.<br />
<br />
* Click the folder "ownCloud-Daten", you will be able to see all your Owncloud files<br />
<br />
* Select the folders/files that you would like to migrate to Nextcloud or select all by ticking the checkbox in the top, depends on user's choice.<br />
<br />
* Click "Move or copy", you find this icon on the top right (near Download), <br />
<br />
* In the target folder, you don't have to select anything just click on copy or move,then you will have all your migrated data in the home directory. But if you want to<br />
have them in a separate folder then create a new folder in the home directory, eg, "migrated-data" <br />
<br />
* Select the target folder "migrated-data" and click on copy or move, It should be noted that if you choose "move" then the data will be <br />
no longer available in owncloud.<br />
<br />
<br />
== Using Owncloud Desktop client? ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34883EDV:Nextcloud2018-03-05T09:21:22Z<p>Kala: /* Sharing files and folders */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be sent. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34875EDV:Nextcloud2018-03-02T11:09:16Z<p>Kala: /* Already using Owncloud Desktop client? */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder & select '''"Keep local data"'''<br />
<br />
* Click on '''Connect''', now it will start synchronizing your owncloud files with the Nextcloud server.<br />
<br />
So from now onwards, your files / folders will be synchronized with Nextcloud server too.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be send. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34873EDV:Nextcloud2018-03-02T10:45:48Z<p>Kala: /* Already using Owncloud Desktop client? */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to '''Settings'''<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder<br />
<br />
* Click on '''Connect''', now its ready to sync your files from the Owncloud server with the Nextcloud server.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be send. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34872EDV:Nextcloud2018-03-02T10:31:15Z<p>Kala: /* Already using Owncloud Desktop client? */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
Then we recommend the users to synchronize the files in Owncloud server with the Nextcloud server so that you have all your files in the latter,<br />
<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to Settings<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder<br />
<br />
* Click on '''Connect''', now its ready to sync your files from the Owncloud server with the Nextcloud server.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be send. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34871EDV:Nextcloud2018-03-02T10:29:58Z<p>Kala: /* Already using Owncloud Desktop client? */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
Then we recommend the users to synchronize the files in "Owncloud" server with the "Nextcloud" server so that you have all your files in the latter.<br />
its very easy to configure & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to Settings<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder<br />
<br />
* Click on '''Connect''', now its ready to sync your files from the Owncloud server with the next cloud server.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be send. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34866EDV:Nextcloud2018-03-02T10:13:57Z<p>Kala: /* Already using Owncloud Desktop client? */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
Then we recommend the users to synchronize the files in owncloud with the next cloud server to have all your files intact in next cloud server in near future,<br />
its very easy & also you don't have to install a Nextcloud client separately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to Settings<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder<br />
<br />
* Click on '''Connect''', now its ready to sync your files from the Owncloud server with the next cloud server.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be send. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kalahttps://wiki.kip.uni-heidelberg.de/KIPwiki/index.php?title=EDV:Nextcloud&diff=34864EDV:Nextcloud2018-03-02T10:07:14Z<p>Kala: /* Already using Owncloud Desktop client? */</p>
<hr />
<div>= [https://nextcloud.kip.uni-heidelberg.de Nextcloud Server] =<br />
<br />
Nextcloud is an open source file sync and share software, a fork / follower of ownCloud.<br />
<br />
The Nextcloud-Server is located in the KIP, so no data is shared and exposed to third parties by default.<br />
<br />
The web server address is: '' https://nextcloud.kip.uni-heidelberg.de ''<br />
<br />
The addresses of the Nextcloud itself are:<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud</nowiki><br />
<br />
You can also use the shortcut, and a combination of these URLs is possible.<br />
<br />
<nowiki>https://nxc.kip.uni-heidelberg.de/n</nowiki><br />
<br />
= [https://docs.nextcloud.com/server/13/user_manual/ File access & synchronization] =<br />
<br />
Please refer to the full '''[https://docs.nextcloud.com/server/13/user_manual/contents.html Nextcloud User Manual]''' for all dirty details. <br />
<br />
In general there are three ways to exchange your data with the Nextcloud-Server.<br />
<br />
* Web-Interface <br />
<br />
* Nextcloud Clients<br />
<br />
* WebDAV-Protocol <br />
<br />
<br />
<br />
== [https://docs.nextcloud.com/server/13/user_manual/files/access_webgui.html Web Interface] ==<br />
<br />
This may be the easiest way to interact with the Nextcloud by using a web browser of your choice. No additional software and settings are required. <br />
<br />
The URL of the login page is mentioned above in the server section.<br />
<br />
After login to the web interface you can create, preview, edit, delete, share, and re-share files, as well as doing many other things.<br />
<br />
== [https://nextcloud.com/install/#install-clients Sync Clients] ==<br />
<br />
The desktop clients can be downloaded here: [https://nextcloud.com/install/ https://nextcloud.com/install/]<br />
<br />
Use the desktop clients to keep your files synchronized between the Nextcloud-Server and other devices.<br />
<br />
During or after the installation of the client, you can specify or create one or more directories on your computer that you want to synchronize<br />
<br />
from or to the Nextcloud-Server, depending on if already existing on your local device or on the server. <br />
<br />
This files and directories will be automatically synchronized in the background as long as the client is running.<br />
<br />
== [https://doc.owncloud.org/desktop/2.4/ Already using Owncloud Desktop client? ] ==<br />
<br />
We recommend the users to synchronize the current files in owncloud with the next cloud server, its very easy & you don't have to use a Nextcloud client seperately. <br />
<br />
Here is how :<br />
<br />
* Open the Owncloud client, go to Settings<br />
<br />
* On the right side, simply click '''Account > Add new''' button then follow account creation wizard<br />
<br />
* Enter the server address https://nextcloud.kip.uni-heidelberg.de/nextcloud<br />
<br />
* Enter the username & password of the kip account<br />
<br />
* Do not make any changes in server but for the local folder, choose the correct location of the local Owncloud folder<br />
<br />
* Click on '''Connect''', now its ready to sync your files from the Owncloud server with the next cloud server.<br />
<br />
==[https://docs.nextcloud.com/server/12/user_manual/files/access_webdav.html Accessing Files Using WebDAV]==<br />
<br />
=== Linux ===<br />
<br />
Install davfs2 (if not already installed)<br />
<br />
aptitude install davfs2<br />
<br />
create a mountpoint / directory somewhere in your filesystem e.g.<br />
<br />
sudo mkdir /mnt/nextcloud<br />
<br />
and mount it<br />
<br />
<nowiki>sudo mount -t davfs https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav /mnt/nextcloud</nowiki><br />
<br />
=== MacOS ===<br />
<br />
Open the ''Go / Gehe zu'' menu and select ''Connect to a server / Mit Server verbinden''<br />
<br />
<nowiki>https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
=== Windows ===<br />
<br />
Mount it on the command line (cmd)<br />
<br />
<nowiki>net use Z: https://nextcloud.kip.uni-heidelberg.de/nextcloud/remote.php/webdav</nowiki><br />
<br />
= Sharing files and folders =<br />
<br />
To share files or folders, click the share overlay icon on any file or folder opens the Details view on the right, where the Share tab has focus.<br />
<br />
Here type the name of the user or email id that you want to share with or an external mail address. After selecting the user you have the options below & you can check them as you want<br />
<br />
* "can edit" allows the user to change the file<br />
* "can reshare" allows the user to share the shared file with other users<br />
* "set expiration date" sets up the till what date the sharing will last<br />
* if the sharing still is enabled - you can disable the sharing with "unshare"<br />
<br />
Any folder that has been shared is marked with the Shared overlay icon. Public link shares are marked with a chain link. Un-shared <br />
folders are blank.<br />
<br />
By selecting "Share link" on the bottom, a link is created with which the file can be downloaded by everybody who knows the link. You can prevent this by setting a password, and for the link you can also set expiration date.<br />
<br />
'''Note :''' <br />
If you want to share a file or folder with a group, make sure you mention the email address of the group in full, eg, "f3@kip.uni-heidelberg.de" instead of selecting just "f3" alone from the list, otherwise the notification email will not be send. <br />
<br />
== Group folders ==<br />
<br />
This enables to have a folder shared between one or more groups. Unlike with normal shares,they will not be able to unshare these folders.<br />
Only EDV has the privileges to create a group folder and assign it to one or more groups, users can not create the group folders on their own.<br />
After a folder is created, EDV can give access to the folder to one or more groups.<br />
<br />
Available permission settings:<br />
<br />
* write -> read and write permissions for all <br />
<br />
* share -> group members can share the content with others</div>Kala